CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?)

Posted by Chuck Rice
on 2004-11-01 13:20:16 UTC
At 1:11 PM -0800 11/1/04, Chris DeHut wrote:
>Hi CHuck,
>
>That's one of the few I have not worked with. Do you have a link to their code set? If so I can quickly scan it and let you know how close it is to some of the others.

This is what I have been using:

<http://emc.sourceforge.net/Handbook/node44.html>

I am generating code such as the following. -Chuck-

%
(========================================================= Initalize)
G90 (~Absolute~)
G20 (~Imperial~)
G17 (~XYplane~)
G40 (~clr CutterComp~)
G80 (~clr Motion~)
F2
G00 G53 X0 Y0 Z0 (~clr Fixture~)

(~engrave({.5},{.5},{.9},{04/19/1955})~)
(~.5,-1,.5,-CAR-,~)#4708=.5
#4709=-1
(--------------------------------------- ~ ee_-,.5,.5 ~)
G00 Z1
#4706=0.5
#4707=0.5
G00 X[#4708+[#4706*0.0410]] Y[#4709+[#4707*0.3398]]
G00 z.01
G01 F1.0 Z-0.0500 (~ Lower slowly into material ~)
F7.0 (~ Back to cutting feed speed ~)

X[#4708+[#4706*0.3926]] Y[#4709+[#4707*0.3398]]

G00 Z 0
#4708=[#4708+[#4706*0.3926]]

(--------------------------------------- ~ ee_C,.5,.5 ~)
G00 Z1
#4706=0.5
#4707=0.5
G00 X[#4708+[#4706*0.1221]] Y[#4709+[#4707*0.4316]]
G00 z.01
G01 F1.0 Z-0.0500 (~ Lower slowly into material ~)
F7.0 (~ Back to cutting feed speed ~)

X[#4708+[#4706*0.1201]] Y[#4709+[#4707*0.4639]]
X[#4708+[#4706*0.1201]] Y[#4709+[#4707*0.4961]]
X[#4708+[#4706*0.1211]] Y[#4709+[#4707*0.5273]]
X[#4708+[#4706*0.1230]] Y[#4709+[#4707*0.5576]]
X[#4708+[#4706*0.1270]] Y[#4709+[#4707*0.5869]]
X[#4708+[#4706*0.1318]] Y[#4709+[#4707*0.6152]]
X[#4708+[#4706*0.1387]] Y[#4709+[#4707*0.6426]]
X[#4708+[#4706*0.1465]] Y[#4709+[#4707*0.6689]]
X[#4708+[#4706*0.1563]] Y[#4709+[#4707*0.6934]]
X[#4708+[#4706*0.1670]] Y[#4709+[#4707*0.7178]]
X[#4708+[#4706*0.1797]] Y[#4709+[#4707*0.7402]]
X[#4708+[#4706*0.1934]] Y[#4709+[#4707*0.7617]]
X[#4708+[#4706*0.2080]] Y[#4709+[#4707*0.7822]]
X[#4708+[#4706*0.2246]] Y[#4709+[#4707*0.8018]]
X[#4708+[#4706*0.2422]] Y[#4709+[#4707*0.8203]]
X[#4708+[#4706*0.2617]] Y[#4709+[#4707*0.8379]]
X[#4708+[#4706*0.2813]] Y[#4709+[#4707*0.8545]]
X[#4708+[#4706*0.3027]] Y[#4709+[#4707*0.8701]]
X[#4708+[#4706*0.3262]] Y[#4709+[#4707*0.8838]]
X[#4708+[#4706*0.3496]] Y[#4709+[#4707*0.8965]]
X[#4708+[#4706*0.3740]] Y[#4709+[#4707*0.9063]]
X[#4708+[#4706*0.4004]] Y[#4709+[#4707*0.9150]]
X[#4708+[#4706*0.4268]] Y[#4709+[#4707*0.9219]]
X[#4708+[#4706*0.4551]] Y[#4709+[#4707*0.9277]]
X[#4708+[#4706*0.4844]] Y[#4709+[#4707*0.9307]]
X[#4708+[#4706*0.5146]] Y[#4709+[#4707*0.9326]]
X[#4708+[#4706*0.5430]] Y[#4709+[#4707*0.9287]]
X[#4708+[#4706*0.5693]] Y[#4709+[#4707*0.9238]]
X[#4708+[#4706*0.5957]] Y[#4709+[#4707*0.9180]]
X[#4708+[#4706*0.6211]] Y[#4709+[#4707*0.9102]]
X[#4708+[#4706*0.6455]] Y[#4709+[#4707*0.9004]]
X[#4708+[#4706*0.6689]] Y[#4709+[#4707*0.8896]]
X[#4708+[#4706*0.6904]] Y[#4709+[#4707*0.8779]]
X[#4708+[#4706*0.7119]] Y[#4709+[#4707*0.8643]]
X[#4708+[#4706*0.7324]] Y[#4709+[#4707*0.8486]]
X[#4708+[#4706*0.7510]] Y[#4709+[#4707*0.8311]]
X[#4708+[#4706*0.7666]] Y[#4709+[#4707*0.8115]]
X[#4708+[#4706*0.7813]] Y[#4709+[#4707*0.7900]]
X[#4708+[#4706*0.7949]] Y[#4709+[#4707*0.7656]]
X[#4708+[#4706*0.8057]] Y[#4709+[#4707*0.7393]]
X[#4708+[#4706*0.8154]] Y[#4709+[#4707*0.7100]]
X[#4708+[#4706*0.8223]] Y[#4709+[#4707*0.6797]]
X[#4708+[#4706*0.8096]] Y[#4709+[#4707*0.7061]]
X[#4708+[#4706*0.7959]] Y[#4709+[#4707*0.7314]]
X[#4708+[#4706*0.7813]] Y[#4709+[#4707*0.7549]]
X[#4708+[#4706*0.7656]] Y[#4709+[#4707*0.7764]]
X[#4708+[#4706*0.7500]] Y[#4709+[#4707*0.7959]]
X[#4708+[#4706*0.7324]] Y[#4709+[#4707*0.8135]]
X[#4708+[#4706*0.7148]] Y[#4709+[#4707*0.8291]]
X[#4708+[#4706*0.6953]] Y[#4709+[#4707*0.8438]]
X[#4708+[#4706*0.6758]] Y[#4709+[#4707*0.8564]]
X[#4708+[#4706*0.6553]] Y[#4709+[#4707*0.8672]]
X[#4708+[#4706*0.6338]] Y[#4709+[#4707*0.8770]]
X[#4708+[#4706*0.6113]] Y[#4709+[#4707*0.8857]]
X[#4708+[#4706*0.5879]] Y[#4709+[#4707*0.8926]]
X[#4708+[#4706*0.5645]] Y[#4709+[#4707*0.8984]]
X[#4708+[#4706*0.5391]] Y[#4709+[#4707*0.9033]]
X[#4708+[#4706*0.5127]] Y[#4709+[#4707*0.9063]]
X[#4708+[#4706*0.4854]] Y[#4709+[#4707*0.9043]]
X[#4708+[#4706*0.4590]] Y[#4709+[#4707*0.9014]]
X[#4708+[#4706*0.4326]] Y[#4709+[#4707*0.8965]]
X[#4708+[#4706*0.4082]] Y[#4709+[#4707*0.8906]]
X[#4708+[#4706*0.3848]] Y[#4709+[#4707*0.8818]]
X[#4708+[#4706*0.3613]] Y[#4709+[#4707*0.8721]]
X[#4708+[#4706*0.3398]] Y[#4709+[#4707*0.8613]]
X[#4708+[#4706*0.3184]] Y[#4709+[#4707*0.8477]]
X[#4708+[#4706*0.2988]] Y[#4709+[#4707*0.8340]]
X[#4708+[#4706*0.2793]] Y[#4709+[#4707*0.8184]]
X[#4708+[#4706*0.2617]] Y[#4709+[#4707*0.8018]]
X[#4708+[#4706*0.2451]] Y[#4709+[#4707*0.7852]]
X[#4708+[#4706*0.2305]] Y[#4709+[#4707*0.7666]]
X[#4708+[#4706*0.2158]] Y[#4709+[#4707*0.7471]]
X[#4708+[#4706*0.2031]] Y[#4709+[#4707*0.7266]]
X[#4708+[#4706*0.1914]] Y[#4709+[#4707*0.7051]]
X[#4708+[#4706*0.1816]] Y[#4709+[#4707*0.6826]]
X[#4708+[#4706*0.1719]] Y[#4709+[#4707*0.6602]]
X[#4708+[#4706*0.1650]] Y[#4709+[#4707*0.6367]]
X[#4708+[#4706*0.1582]] Y[#4709+[#4707*0.6113]]
X[#4708+[#4706*0.1533]] Y[#4709+[#4707*0.5869]]
X[#4708+[#4706*0.1504]] Y[#4709+[#4707*0.5605]]
X[#4708+[#4706*0.1484]] Y[#4709+[#4707*0.5342]]
X[#4708+[#4706*0.1475]] Y[#4709+[#4707*0.5059]]
X[#4708+[#4706*0.1475]] Y[#4709+[#4707*0.4727]]
X[#4708+[#4706*0.1494]] Y[#4709+[#4707*0.4404]]
X[#4708+[#4706*0.1523]] Y[#4709+[#4707*0.4102]]
X[#4708+[#4706*0.1572]] Y[#4709+[#4707*0.3799]]
X[#4708+[#4706*0.1631]] Y[#4709+[#4707*0.3506]]
X[#4708+[#4706*0.1709]] Y[#4709+[#4707*0.3232]]
X[#4708+[#4706*0.1797]] Y[#4709+[#4707*0.2959]]
X[#4708+[#4706*0.1904]] Y[#4709+[#4707*0.2705]]
X[#4708+[#4706*0.2021]] Y[#4709+[#4707*0.2461]]
X[#4708+[#4706*0.2158]] Y[#4709+[#4707*0.2227]]
X[#4708+[#4706*0.2295]] Y[#4709+[#4707*0.2012]]
X[#4708+[#4706*0.2441]] Y[#4709+[#4707*0.1816]]
X[#4708+[#4706*0.2607]] Y[#4709+[#4707*0.1631]]
X[#4708+[#4706*0.2773]] Y[#4709+[#4707*0.1465]]
X[#4708+[#4706*0.2949]] Y[#4709+[#4707*0.1309]]
X[#4708+[#4706*0.3135]] Y[#4709+[#4707*0.1172]]
X[#4708+[#4706*0.3340]] Y[#4709+[#4707*0.1045]]
X[#4708+[#4706*0.3545]] Y[#4709+[#4707*0.0938]]
X[#4708+[#4706*0.3770]] Y[#4709+[#4707*0.0850]]
X[#4708+[#4706*0.3994]] Y[#4709+[#4707*0.0771]]
X[#4708+[#4706*0.4238]] Y[#4709+[#4707*0.0713]]
X[#4708+[#4706*0.4492]] Y[#4709+[#4707*0.0664]]
X[#4708+[#4706*0.4756]] Y[#4709+[#4707*0.0635]]
X[#4708+[#4706*0.5029]] Y[#4709+[#4707*0.0615]]
X[#4708+[#4706*0.5352]] Y[#4709+[#4707*0.0654]]
X[#4708+[#4706*0.5654]] Y[#4709+[#4707*0.0703]]
X[#4708+[#4706*0.5947]] Y[#4709+[#4707*0.0771]]
X[#4708+[#4706*0.6221]] Y[#4709+[#4707*0.0859]]
X[#4708+[#4706*0.6475]] Y[#4709+[#4707*0.0967]]
X[#4708+[#4706*0.6709]] Y[#4709+[#4707*0.1094]]
X[#4708+[#4706*0.6934]] Y[#4709+[#4707*0.1230]]
X[#4708+[#4706*0.7139]] Y[#4709+[#4707*0.1387]]
X[#4708+[#4706*0.7334]] Y[#4709+[#4707*0.1572]]
X[#4708+[#4706*0.7510]] Y[#4709+[#4707*0.1758]]
X[#4708+[#4706*0.7676]] Y[#4709+[#4707*0.1973]]
X[#4708+[#4706*0.7842]] Y[#4709+[#4707*0.2207]]
X[#4708+[#4706*0.7988]] Y[#4709+[#4707*0.2451]]
X[#4708+[#4706*0.8135]] Y[#4709+[#4707*0.2715]]
X[#4708+[#4706*0.8262]] Y[#4709+[#4707*0.2998]]
X[#4708+[#4706*0.8379]] Y[#4709+[#4707*0.3301]]
X[#4708+[#4706*0.8320]] Y[#4709+[#4707*0.2969]]
X[#4708+[#4706*0.8232]] Y[#4709+[#4707*0.2656]]
X[#4708+[#4706*0.8135]] Y[#4709+[#4707*0.2363]]
X[#4708+[#4706*0.8008]] Y[#4709+[#4707*0.2090]]
X[#4708+[#4706*0.7871]] Y[#4709+[#4707*0.1836]]
X[#4708+[#4706*0.7705]] Y[#4709+[#4707*0.1602]]
X[#4708+[#4706*0.7520]] Y[#4709+[#4707*0.1387]]
X[#4708+[#4706*0.7324]] Y[#4709+[#4707*0.1191]]
X[#4708+[#4706*0.7100]] Y[#4709+[#4707*0.1025]]
X[#4708+[#4706*0.6855]] Y[#4709+[#4707*0.0869]]
X[#4708+[#4706*0.6602]] Y[#4709+[#4707*0.0732]]
X[#4708+[#4706*0.6328]] Y[#4709+[#4707*0.0615]]
X[#4708+[#4706*0.6035]] Y[#4709+[#4707*0.0527]]
X[#4708+[#4706*0.5723]] Y[#4709+[#4707*0.0449]]
X[#4708+[#4706*0.5391]] Y[#4709+[#4707*0.0391]]
X[#4708+[#4706*0.5039]] Y[#4709+[#4707*0.0361]]
X[#4708+[#4706*0.4746]] Y[#4709+[#4707*0.0371]]
X[#4708+[#4706*0.4453]] Y[#4709+[#4707*0.0400]]
X[#4708+[#4706*0.4180]] Y[#4709+[#4707*0.0449]]
X[#4708+[#4706*0.3916]] Y[#4709+[#4707*0.0518]]
X[#4708+[#4706*0.3662]] Y[#4709+[#4707*0.0605]]
X[#4708+[#4706*0.3428]] Y[#4709+[#4707*0.0703]]
X[#4708+[#4706*0.3193]] Y[#4709+[#4707*0.0820]]
X[#4708+[#4706*0.2979]] Y[#4709+[#4707*0.0957]]
X[#4708+[#4706*0.2773]] Y[#4709+[#4707*0.1104]]
X[#4708+[#4706*0.2588]] Y[#4709+[#4707*0.1270]]
X[#4708+[#4706*0.2402]] Y[#4709+[#4707*0.1455]]
X[#4708+[#4706*0.2236]] Y[#4709+[#4707*0.1650]]
X[#4708+[#4706*0.2070]] Y[#4709+[#4707*0.1855]]
X[#4708+[#4706*0.1924]] Y[#4709+[#4707*0.2090]]
X[#4708+[#4706*0.1787]] Y[#4709+[#4707*0.2334]]
X[#4708+[#4706*0.1660]] Y[#4709+[#4707*0.2588]]
X[#4708+[#4706*0.1543]] Y[#4709+[#4707*0.2861]]
X[#4708+[#4706*0.1445]] Y[#4709+[#4707*0.3135]]
X[#4708+[#4706*0.1367]] Y[#4709+[#4707*0.3418]]
X[#4708+[#4706*0.1299]] Y[#4709+[#4707*0.3711]]
X[#4708+[#4706*0.1250]] Y[#4709+[#4707*0.4014]]
X[#4708+[#4706*0.1221]] Y[#4709+[#4707*0.4316]]

G00 Z 0
#4708=[#4708+[#4706*0.8379]]

Discussion Thread

tigershark_b 2004-10-31 06:50:11 UTC easy to learn use cad/cam cnc software? R Rogers 2004-10-31 07:04:50 UTC Re: [CAD_CAM_EDM_DRO] easy to learn use cad/cam cnc software? caudlet 2004-10-31 08:49:17 UTC Re: easy to learn use cad/cam cnc software? Tyson S. 2004-10-31 11:00:16 UTC Re: [CAD_CAM_EDM_DRO] Re: easy to learn use cad/cam cnc software? caudlet 2004-10-31 12:08:09 UTC Re: easy to learn use cad/cam cnc software? Alan Marconett 2004-10-31 14:20:21 UTC Re: [CAD_CAM_EDM_DRO] easy to learn use cad/cam cnc software? Kim Lux 2004-10-31 14:23:39 UTC Re: [CAD_CAM_EDM_DRO] easy to learn use cad/cam cnc software? Tom Hubin 2004-10-31 15:36:48 UTC Re: [CAD_CAM_EDM_DRO] easy to learn use cad/cam cnc software? Greg Jackson 2004-10-31 18:48:33 UTC RE: [CAD_CAM_EDM_DRO] Re: easy to learn use cad/cam cnc software? Tyson S. 2004-10-31 20:17:11 UTC RE: [CAD_CAM_EDM_DRO] Re: easy to learn use cad/cam cnc software? caudlet 2004-11-01 06:41:38 UTC Re: easy to learn use cad/cam cnc software? Chuck Rice 2004-11-01 09:50:16 UTC Gcode standards (Was: easy to learn use cad/cam cnc software?) lcdpublishing 2004-11-01 11:05:27 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-01 13:03:19 UTC [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-01 13:20:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Raymond Heckert 2004-11-01 17:37:05 UTC Re: [CAD_CAM_EDM_DRO] easy to learn use cad/cam cnc software? Fred Smith 2004-11-02 02:18:24 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) doug98105 2004-11-02 05:11:29 UTC Re: easy to learn use cad/cam cnc software? caudlet 2004-11-02 07:02:47 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-02 08:04:17 UTC [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Fred Smith 2004-11-02 08:55:35 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-02 09:19:53 UTC [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Jon Elson 2004-11-02 10:16:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) R Rogers 2004-11-02 17:44:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Ron Ginger 2004-11-02 18:38:03 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Greg Jackson 2004-11-02 19:45:39 UTC RE: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) wthomas@g... 2004-11-02 22:08:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode stand_from Mechanical Desktop Fred Smith 2004-11-03 06:34:54 UTC Re: Gcode stand_from Mechanical Desktop Fred Smith 2004-11-03 07:07:21 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-03 07:59:50 UTC [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Steven Ciciora 2004-11-03 08:31:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) turbulatordude 2004-11-03 09:02:36 UTC Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Jon Elson 2004-11-03 09:33:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Paul 2004-11-03 10:23:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?) Chuck Rice 2004-11-04 17:59:05 UTC Gcode standards (more info) Ron Kline 2004-11-04 18:35:29 UTC Won't do that again -Gecko Roy J. Tellason 2004-11-04 20:01:44 UTC Re: [CAD_CAM_EDM_DRO] Won't do that again -Gecko R Rogers 2004-11-05 05:13:37 UTC Re: [CAD_CAM_EDM_DRO] Gcode standards (more info)