RE: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use cad/cam cnc software?)

I have been using TurboCADCAM for a while now, it works great. Let me know
if you have any problems. The software is great, but the biggest problem is
that nobody in their support company knows how to use it.

Greg

> -----Original Message-----
> From: Ron Ginger [mailto:ronginger@...]
> Sent: Tuesday, November 02, 2004 8:27 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Gcode standards (Was: easy to learn use
> cad/cam cnc software?)
>
>
>
> I have both bobcad and vector. I hate them both. They are about the least
> intutive programs I have ever tried to run. I can often make a part with
> bobcad, but only rarely with vector. Most of the reports you read here is
> how someone finally managed to overcome the strange methods and get some
> usefull work- the only person I have ever heard say he really LIKED vector
> is Fred- (the guy that sells it :-) Everyone else seems to tolerate it.
>
> But, last week I got an upgrade offer from TurboCAD that was to
> good to pass
> up. I bought the V9 package for about $40 and registered it. I
> like drawing
> wtih Turbocad-it has some great tools, and is very simple and logical to
> use. I was offered TurboCADCAM for US$199 as an upgrade.
>
> Ive only had it a few days, and so far have just tried out the tutorials
> (real tutorials in clearly professionally written manuals) This is GREAT-
> Its like going from an old DOS edlin to a modern word processor. The
> operations are clear and simple- the code generation seems to be very
> configurable. It is only a 2D program- but since TurboCAD is a
> full 3D solid
> modeler, and a few of the screens have fields with obvious 3D terms (and
> notes in the manuals about being reserved for future use.) it seems clear
> this will be enhanced in future versions (its now V2). It has full support
> for lathe as well as mill.
>
> I think I have found CADCAM nirvanna!
>
> ron ginger
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>