CAD CAM EDM DRO - Yahoo Group Archive

Re: Bridgeport retrofit servo questions

Posted by cnc_4_me
on 2005-01-29 12:11:35 UTC
> decent encoder. If not, Les mentioned that it is possible to fit up
> to maybe a 2.5:1 ratio setup under the stock cover. Not sure about
> the Z axis yet...that may take some doing.

My advice, you already have a working z axis with a stepper....put a
gecko on it and leave it as a stepper....Ok no 200ipm rapids...but Z
is short....Z axis are tough to rework...

Don't forget, you can mix and match axis control with mach2


Wally




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "braidmeister"
<braidmeister@y...> wrote:
>
> No I was the one throwing planes!!
>
> Yes, that's the motor in question. It seems to me that it would be
an
> ideal fit for the BP. I am hoping that I can get away with 1:1 and
a
> decent encoder. If not, Les mentioned that it is possible to fit up
> to maybe a 2.5:1 ratio setup under the stock cover. Not sure about
> the Z axis yet...that may take some doing.
>
> We'll see!
>
> -Brady
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Luke1027 <luke1027@p...>
> wrote:
> > Brady,
> >
> > Yes and No....I need to think about this for awhile for it to
sink
> in and
> > make more sence. And certainly re-read what is being posted on
> this thread.
> > SO... I am going to stop throwing paper airplanes now
> > and pay closer attention to the Teachers.
> >
> > From want I gather from the past threads, it looks like you are
> going with
> > the 2 HP 130 VDC 3210 RPM MOTOR (Item# 10-1906) from
> www.surpluscenter.com.
> > Right?
> >
> > Thanks for spelling it out in easier to understand (an examples)
> > terms.
> >
> > Luke
> >
> >
> > braidmeister wrote:
> >
> > >Does that make any kind of sense? Again...don't take this as
> > >gospel...I'm in the same class as you! (the one in the back
> throwing
> > >paper airplanes)
> > >
> > >-Brady
> > >
> > >
> > >

Discussion Thread

braidmeister 2005-01-28 12:40:56 UTC Bridgeport retrofit servo questions Les Newell 2005-01-28 15:41:29 UTC Re: [CAD_CAM_EDM_DRO] Bridgeport retrofit servo questions braidmeister 2005-01-28 15:59:12 UTC Re: Bridgeport retrofit servo questions Les Newell 2005-01-28 18:35:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-28 19:09:59 UTC Re: Bridgeport retrofit servo questions Mariss Freimanis 2005-01-28 19:57:03 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-28 20:17:01 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-28 21:04:47 UTC Re: Bridgeport retrofit servo questions Mariss Freimanis 2005-01-28 22:47:54 UTC Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 02:54:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 03:42:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 03:49:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions AbbyKatt 2005-01-29 04:59:52 UTC Max voltage for a stepper motor? washcomp 2005-01-29 06:18:26 UTC Re: Bridgeport retrofit servo questions turbulatordude 2005-01-29 07:23:32 UTC Re: Max voltage for a stepper motor? braidmeister 2005-01-29 08:23:15 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 08:44:59 UTC Re: Bridgeport retrofit servo questions Fred Smith 2005-01-29 08:55:24 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 10:30:01 UTC Re: [CAD_CAM_EDM_DRO] Bridgeport retrofit servo questions Luke1027 2005-01-29 10:32:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 10:55:30 UTC Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 11:03:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:10:37 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:14:10 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 11:17:35 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 11:22:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:27:02 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 11:33:38 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:39:04 UTC Re: Bridgeport retrofit servo questions washcomp 2005-01-29 11:47:14 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 11:48:20 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 11:54:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:55:42 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 11:57:29 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 12:01:44 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 12:01:46 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 12:06:34 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 12:08:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 12:11:35 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 12:16:04 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 12:17:27 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 12:33:35 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 12:50:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 12:52:13 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 12:54:59 UTC Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 13:16:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 13:17:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Les Newell 2005-01-29 13:25:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions R Rogers 2005-01-29 13:27:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 13:44:26 UTC Re: Bridgeport retrofit servo questions 1:1 ratio R Rogers 2005-01-29 14:24:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 14:45:15 UTC Re: Bridgeport retrofit servo questions 1:1 ratio Dan Mauch 2005-01-29 14:53:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions R Rogers 2005-01-29 15:03:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 15:16:26 UTC Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 15:16:41 UTC Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 15:43:11 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 15:43:14 UTC Re: Bridgeport retrofit servo questions R Rogers 2005-01-29 16:02:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 16:03:38 UTC Re: Bridgeport retrofit servo questions R Rogers 2005-01-29 16:12:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 16:28:32 UTC Re: Bridgeport retrofit servo questions 1:1 ratio cnc_4_me 2005-01-29 16:37:44 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 16:58:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-29 17:19:43 UTC Re: Bridgeport retrofit servo questions Luke1027 2005-01-29 17:38:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions R Rogers 2005-01-29 18:37:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio braidmeister 2005-01-29 18:45:12 UTC Re: Bridgeport retrofit servo questions cnc_4_me 2005-01-29 19:31:14 UTC Re: Bridgeport retrofit servo questions 1:1 ratio R Rogers 2005-01-29 20:11:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio cnc_4_me 2005-01-29 20:18:25 UTC Re: Bridgeport retrofit servo questions 1:1 ratio R Rogers 2005-01-29 20:42:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions 1:1 ratio R Rogers 2005-01-29 20:47:01 UTC CNC wiring PDF updated cnc_4_me 2005-01-29 21:53:21 UTC Re: CNC wiring PDF updated Les Newell 2005-01-30 01:27:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Polaraligned 2005-01-30 06:52:44 UTC Re: CNC wiring PDF updated Robert Campbell 2005-01-30 07:14:22 UTC Re: [CAD_CAM_EDM_DRO] CNC wiring PDF updated R Rogers 2005-01-30 08:27:45 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC wiring PDF updated Dan Mauch 2005-01-30 09:48:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Luke1027 2005-01-30 10:36:30 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC wiring PDF updated braidmeister 2005-01-30 12:09:41 UTC Re: CNC wiring PDF updated John Stevenson 2005-01-30 15:22:13 UTC Re: CNC wiring PDF updated R Rogers 2005-01-30 16:41:50 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC wiring PDF updated Jon Elson 2005-01-30 17:00:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Stephen Wille Padnos 2005-01-30 18:50:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions braidmeister 2005-01-30 19:18:25 UTC Re: Bridgeport retrofit servo questions Dan Mauch 2005-01-31 09:29:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Jon Elson 2005-01-31 10:17:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions Stephen Wille Padnos 2005-01-31 10:23:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions John Rouche 2005-01-31 10:36:10 UTC Re: Bridgeport retrofit servo questions Jon Elson 2005-01-31 23:01:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions m0nkey0ne 2005-02-02 14:23:04 UTC Re: Bridgeport retrofit servo questions