Re: Bridgeport retrofit servo questions

> The Renco should work fine but they draw 75ma so if you are using

> 320's remember that you need an external power supply.
> Dan
> Camtronics Inc
>
> ----- Original Message -----
> From: "braidmeister" <braidmeister@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, January 29, 2005 12:54 PM
> Subject: [CAD_CAM_EDM_DRO] Re: Bridgeport retrofit servo questions
>
>
> >
> >
> > Yes...probably about $60/ea...but you'll be getting exactly the
> > encoder you need & not fussing about with turning shafts down,
> > drilling holes or compromising on encoder counts.
> >
> > I'm not sure if Renco has a cheaper/comparable model that will

> > I only started investigating encoders last night...more on these
> > later. I'll keep you posted.
> >
> > -Brady
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Luke1027 <luke1027@p...>
> > wrote:
> >> Brady,
> >>
> >> I checked this link out ... wow, I find it confusing to
> >> decide what exactly I would need ... and what it will cost.
> >> Please when you decide what exactly what you are are ordering,
> >> will you please pass that info my way?
> >> From what I see it may cost over $60.00+ / drive.
> >>
> >> Luke
> >>
> >>
> >> braidmeister wrote:
> >>
> >> >http://www.usdigital.com/products/e3/
> >> >
> >> >E3 model with H option (thru hole for long tail shaft) and
> > probably
> >> >1000 CPR (counts per rev). Haven't figured out which one exactly
> > yet,
> >> >because I may opt to get connectors and cables as well when I
> > order.
> >> >I am also not sure what the limit is on the Geckos or Rutex as

> > as
> >> >how many lines I can go max (is there a restriction?)
> >> >
> >> >-Brady
> >> >
> >> >
> >> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

> > timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to

> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

> > sister site to the CCED group, as many of the same members are

> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >