Re: Is this motor workable?

There are some really nice servos for a Bridgeport here:

http://www.servosystems.com/servo_motors_surplus2.htm

5/8" shaft, 3/8" for encoder...tons of torque.
Just have to spend $500 each without encoders!!
Might be worth spending the $$$$ and getting a motor you
KNOW is gonna work.

Scott


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "braidmeister"
<braidmeister@y...> wrote:

>
> Cripes!
>
> List on those are $1400+ ea!
>
> -Brady
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Stephen Wille Padnos
> <spadnos@s...> wrote:
> > cnc_4_me wrote:
> >
> > >Well many bridgeport retrofits are using 30lb-in or so servos for
> x
> > >and y and 40lb-in or so on the knee...But there is a lot of
> confusion
> > >on this spec as to if it is continuous or not...
> > >
> > >Wally
> > >
> > >
> > It's continuous, not peak. My motors are 28 in-lb continuous, and
> peak
> > at 112.6 in-lb.
> > The motors I have are Baldors, basically the MTE-4070-BLBCE (28 in-
> lb,
> > 9.2A, 2500RPM, 150V, 7V/kRPM tach, 1000 cycle encoder)
> > - Steve