Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Posted by
bobmcknight@c...
on 2005-05-17 15:09:55 UTC
Chris
Do you need perforator tape for your teletype (Friden)?
How about some projector readouts? Nixie tubes?
I am cleaning out a few years of electronics from my
shop (actually I have decided to occupy my shop and
it is more trouble that occuping IRAQ.) I loaded up
my trailer and went to a ham swap meet.. I got rid of
a lot of antiques. I had a digital voltmeter that sounded
like a pin ball machine when you read a voltagke. Also
sold a voltmeter with Nixie Tubes.. I no more than got
home (with my 16' enclosed trailer with a 50' pneumatic
tower on the front) than I got a call . A friend who had
had a stroke was moving and there was just a couple of
days to finish cleaning his shop out.(they had been working
on it for several months) What was new an saleable, was
gone. I swear that almost everything I had sold at the swap
meet was there. The Nixies Tube Voltmeter has been replace d
with the companion Nixie Tube Ohmeter. ALL the teletype
machines were junked(he had a museum). One interresting
item was a Sencore Oscilloscope. It has about a 2" tube with
a wooden cabinent. It must date from the late 30s. Gotta find
a good home for it.
I'm in Phoenix Arizona and for those familier with the place, I
have a minature version of Apache Surplus.
The occupation is well under way, and There is a MAXNC 10
OL that is being uncovered as well as a Drill/Mill with Ah Ha
Controls. Also a couple of HP Plotters have been buried.
The archeologist should be here anyday.
Bob McKnight
Do you need perforator tape for your teletype (Friden)?
How about some projector readouts? Nixie tubes?
I am cleaning out a few years of electronics from my
shop (actually I have decided to occupy my shop and
it is more trouble that occuping IRAQ.) I loaded up
my trailer and went to a ham swap meet.. I got rid of
a lot of antiques. I had a digital voltmeter that sounded
like a pin ball machine when you read a voltagke. Also
sold a voltmeter with Nixie Tubes.. I no more than got
home (with my 16' enclosed trailer with a 50' pneumatic
tower on the front) than I got a call . A friend who had
had a stroke was moving and there was just a couple of
days to finish cleaning his shop out.(they had been working
on it for several months) What was new an saleable, was
gone. I swear that almost everything I had sold at the swap
meet was there. The Nixies Tube Voltmeter has been replace d
with the companion Nixie Tube Ohmeter. ALL the teletype
machines were junked(he had a museum). One interresting
item was a Sencore Oscilloscope. It has about a 2" tube with
a wooden cabinent. It must date from the late 30s. Gotta find
a good home for it.
I'm in Phoenix Arizona and for those familier with the place, I
have a minature version of Apache Surplus.
The occupation is well under way, and There is a MAXNC 10
OL that is being uncovered as well as a Drill/Mill with Ah Ha
Controls. Also a couple of HP Plotters have been buried.
The archeologist should be here anyday.
Bob McKnight
On 17 May 2005 at 21:29, lcdpublishing wrote:
LOL! I think I remember seeing that but didn't know what it was
called. Is that the thing that looked like an old "Tube" as in the
gizmo before the transistor?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Drew Rogge
<drew@p...> wrote:
> There were all kinds of neat displays. I remember one machine had
> a piece of film with the digits 0-9 on it and 10 small incandescent
> light bulbs. Things were set up such that all of the digits were
> focused at the same window on the display. To display a digit, the
> appropriate lamp was turned on.
>
> But by far my favorite display was that on a 5-axis Sunstrand
OmniMill.
> It used Nixie tubes for the digits. Just got to love those Nixie
tubes!
>
> Drew
>
> lcdpublishing wrote:
>
> > Also, those machines (NC) didn't have CRTs like we have today.
> > Rather you had a series of 7 segment LEDs that would display one
> > word of the program at a time - this feature was actually rare
on
> > early NC machines. Basic practice was to "Punch out a paper
tape"
> > and at the same time, using a teletype (or teletype type of
machine)
> > print out the program listing - without the printout, it was a
> > nightmare.
> >
> > Chris
> >
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Mark
2005-05-17 04:24:08 UTC
CNC scripting stuff....
Alex Holden
2005-05-17 05:46:45 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
R Rogers
2005-05-17 06:00:26 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Alex Holden
2005-05-17 07:46:58 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Codesuidae
2005-05-17 08:11:30 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Ted Gregorius
2005-05-17 08:42:25 UTC
Re: Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Codesuidae
2005-05-17 09:21:02 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
lcdpublishing
2005-05-17 09:59:55 UTC
Re: CNC scripting stuff....
Alex Holden
2005-05-17 10:25:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alan Marconett
2005-05-17 11:00:43 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
lcdpublishing
2005-05-17 11:09:14 UTC
Re: CNC scripting stuff....
Codesuidae
2005-05-17 11:44:39 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
D Cranston
2005-05-17 12:12:46 UTC
RE: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alan Marconett
2005-05-17 12:45:48 UTC
RE: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Codesuidae
2005-05-17 13:12:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alex Holden
2005-05-17 13:13:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alex Holden
2005-05-17 13:25:07 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Drew Rogge
2005-05-17 13:30:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
lcdpublishing
2005-05-17 13:35:02 UTC
Re: CNC scripting stuff....
Codesuidae
2005-05-17 13:55:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Drew Rogge
2005-05-17 14:03:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Codesuidae
2005-05-17 14:07:15 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
lcdpublishing
2005-05-17 14:29:53 UTC
Re: CNC scripting stuff....
bobmcknight@c...
2005-05-17 15:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Brian
2005-05-17 15:28:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alan Marconett
2005-05-17 16:24:37 UTC
RE: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Paul Amaranth
2005-05-17 17:01:11 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Alex Holden
2005-05-17 23:31:30 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Alex Holden
2005-05-17 23:39:28 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Fred Smith
2005-05-18 05:16:40 UTC
Re: CNC scripting stuff....
Drew Rogge
2005-05-18 07:10:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Alan Marconett
2005-05-18 09:03:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Jon Elson
2005-05-18 09:09:25 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Bruce Pigeon
2005-05-18 09:13:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC scripting stuff....
Paul Amaranth
2005-05-18 11:12:08 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Codesuidae
2005-05-18 12:27:07 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
bank haam
2005-05-19 06:54:28 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
Codesuidae
2005-05-19 07:10:49 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
bank haam
2005-05-19 08:14:25 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....
bank haam
2005-05-19 08:14:31 UTC
Re: [CAD_CAM_EDM_DRO] CNC scripting stuff....