CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Lithium Grease

Posted by Randy Brown
on 2005-10-16 16:20:03 UTC
Try some grease I found on the net the stuff is not effected by water or
solvents and stick to the surface real good it doesn't seem to wipe off.
There site is at enjenjoesproducts.com
Randy

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of cnc002@...
Sent: Sunday, October 16, 2005 3:30 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease



In a message dated 10/16/2005 12:07:14 P.M. Eastern Daylight Time,
jymmm@... writes:

MDF dust goes EVERYWHERE, par for the course, so I just make sure I put
enough fresh grease on as needed. If this happens too often, maybe I'll
have
to look at an alternative lube. Teflon is a dry lube in a spray can, but
just
doesn't sound right for ballscrews.

Anyhow... thanks again,
Jim...



Jim:

In any woodworking environment, dry lube is NEVER a good idea. One of the
reasons plain old oil works on slideways, etc. is that it keeps the dust
damp
and not nearly as abrasive as it would be if dry. For starters, the dry
lube
will be gone almost immediately because of the dust, it will simply wear it
all away, second, once gone you are dealing with no lube. Best to stick
with
grease and oil, it works for multi-million dollar equipment, should be good
for small shops as well.

Randy A.


[Non-text portions of this message have been removed]



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

jymmm 2005-10-14 11:51:29 UTC Lithium Grease juan gelt 2005-10-14 12:43:41 UTC Re: [CAD_CAM_EDM_DRO] Lithium Grease cnc002@a... 2005-10-14 15:02:34 UTC Re: [CAD_CAM_EDM_DRO] Lithium Grease jymmm 2005-10-14 18:50:45 UTC Re: Lithium Grease Jon Elson 2005-10-14 21:22:56 UTC Re: [CAD_CAM_EDM_DRO] Lithium Grease jymmm 2005-10-14 22:09:21 UTC Re: Lithium Grease carlcnc 2005-10-15 11:27:40 UTC Re: Lithium Grease cnc002@a... 2005-10-15 13:56:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease Jymmm 2005-10-16 09:06:13 UTC Re: Lithium Grease cnc002@a... 2005-10-16 12:30:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease Randy Brown 2005-10-16 16:20:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Lithium Grease Babar 2005-10-16 20:24:33 UTC Step and Dir to motor pulses.....????? turbulatordude 2005-10-16 23:52:42 UTC Re: Step and Dir to motor pulses.....????? Chris Horne 2005-10-17 04:15:44 UTC Re: Lithium Grease cnc002@a... 2005-10-17 06:33:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease cnc002@a... 2005-10-17 06:34:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease pavel59 2005-10-17 07:25:35 UTC Re: Lithium Grease cnc002@a... 2005-10-17 07:58:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease pavel59 2005-10-17 08:24:53 UTC Re: Lithium Grease cnc002@a... 2005-10-17 10:14:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease Roy J. Tellason 2005-10-17 14:24:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Step and Dir to motor pulses.....????? John Johnson 2005-10-17 19:36:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease Babar 2005-10-17 20:45:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Step and Dir to motor pulses.....????? cnc002@a... 2005-10-18 06:04:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease John Johnson 2005-10-18 07:42:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease John Johnson 2005-10-18 07:49:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease OT John Johnson 2005-10-18 07:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease OT Jymmm 2005-10-18 11:16:40 UTC Re: Lithium Grease pavel59 2005-10-18 12:28:34 UTC Re: Lithium Grease