Re: [CAD_CAM_EDM_DRO] Re: Lithium Grease

If the brake cleaner has methyline chloride (think that's right) in it,
it will destroy paint and plastic.

Regards,
JJ

On 15-Oct-2005, at 14:26, carlcnc wrote:

>
>> Jim...
> try brake cleaner[aresol] run back and fortha a few times,
> occasionally spraying a bit of the cleaner in front of the nut,then
> hold
> a brass brush on screw,followed by rag,if it is real stubborn use a
> small tip blow gun aimed at the leading end of the ballnut.
> always works for me!
> if you cut much mdf or pitchy woods,do NOT use wd40 as lube!
>
> Carl
>>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

---
Help everyone. If you can't do that, then at least be nice.