Re: [CAD_CAM_EDM_DRO] Why does my X axis go faster than my Y axis????

I think you have the expected result here.

You can move at 1300 mm/min max along either axis. So, if you are moving at
a 45 degree angle, you can move at sqrt(1300^2+1300^2) = 1838 mm/min max. I
think that's what you are seeing.

Please correct me if I am totally off-base

Vlad

On 12/21/05, apples0_17 <apalais@...> wrote:
>
> When I cut a part out using Mach3 my x axis will move faster that the
> y axis.
>
> For example:
>
> I have used a basic shape that has a couple 90 degree corners and a
> diagonal back to the start point.
>
> The shape is set to cut at 1300mm/min.
>
> The y axis will cut at 1300mm/min, but when the machine turns a corner
> and the x axis starts moving. The feed rated goes over the set
> 1300mm/min up to 1800mm/min.
>
> Then turns a corner and back onto the y axis and it is fine at
> 1300mm/min again.
>
> When doing an angle say 45degrees, it will move at 1400mm/min.
>
> What is going on???
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>


--
Vlad's shop
http://www.krupin.net/serendipity/index.php?/categories/2-metalworking


[Non-text portions of this message have been removed]