Re: [CAD_CAM_EDM_DRO] Why does my X axis go faster than my Y axis????

My sugestion to you is if you are using Mach cnc, join the mach yahoo group, or go to www.artofcnc.ca there you will find video tutorials (lots of them), to help you understand the software,

......................Edmund..................



apples0_17 <apalais@...> wrote:
When I cut a part out using Mach3 my x axis will move faster that the
y axis.

For example:

I have used a basic shape that has a couple 90 degree corners and a
diagonal back to the start point.

The shape is set to cut at 1300mm/min.

The y axis will cut at 1300mm/min, but when the machine turns a corner
and the x axis starts moving. The feed rated goes over the set
1300mm/min up to 1800mm/min.

Then turns a corner and back onto the y axis and it is fine at
1300mm/min again.

When doing an angle say 45degrees, it will move at 1400mm/min.

What is going on???





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links











........Edmund.........


[Non-text portions of this message have been removed]