Re: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Posted by
Codesuidae
on 2006-01-25 20:59:50 UTC
Darren Lucke wrote:
boot it on the system. It is a graphical, easy to use Linux system that
boots and runs entirely from the CD. You can mount the NT file system
and read your files from it and write them off to floppy or to the network.
You can also find floppy disk systems that will read from NTFS. As a
last resort, pull the drive and install it in another NT or XP system as
a second drive.
Unless the drive is physically damaged, you should be able to get your
files off with no more than a couple hours (at the outside).
Dave K
>I slipped up.... I've lost at minimum 2 weeks worth ofIf you can boot from a CD download a copy of Knoppix, burn it to CD, and
>my CAD files up to this point. Listing back here so
>that you guys BACKUP your CAD FILES and don't be like
>me....
>
>
boot it on the system. It is a graphical, easy to use Linux system that
boots and runs entirely from the CD. You can mount the NT file system
and read your files from it and write them off to floppy or to the network.
You can also find floppy disk systems that will read from NTFS. As a
last resort, pull the drive and install it in another NT or XP system as
a second drive.
Unless the drive is physically damaged, you should be able to get your
files off with no more than a couple hours (at the outside).
Dave K
Discussion Thread
oneluckeboy
2006-01-25 14:50:25 UTC
Windows OS .... troubles and can't access my cad files
Chris Brick
2006-01-25 15:05:38 UTC
Re: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files
fignoggle
2006-01-25 15:19:20 UTC
Re: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files
Dave Halliday
2006-01-25 19:20:50 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files
Darren Lucke
2006-01-25 20:45:06 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Codesuidae
2006-01-25 20:59:50 UTC
Re: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Ken Strauss
2006-01-25 21:01:38 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Darren Lucke
2006-01-25 21:17:38 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Dave Halliday
2006-01-25 21:26:38 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
kz1927
2006-01-25 21:38:45 UTC
Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
Darren Lucke
2006-01-25 21:45:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
kz1927
2006-01-25 21:54:49 UTC
Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
Stephen Wille Padnos
2006-01-25 22:02:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
Darren Lucke
2006-01-25 22:03:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
Ken Strauss
2006-01-26 05:40:40 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Jymmm
2006-01-26 07:55:43 UTC
RE: Windows OS .... troubles and can't access my cad files
Jeff Goldberg
2006-01-26 08:51:36 UTC
RE: Windows OS .... troubles and can't access my cad files - General good advice
Darren Lucke
2006-01-26 09:06:59 UTC
Re: [CAD_CAM_EDM_DRO] RE: Windows OS .... troubles and can't access my cad files - General good advice
Jon Elson
2006-01-26 09:56:16 UTC
Re: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Dave Halliday
2006-01-26 20:40:00 UTC
RE: [CAD_CAM_EDM_DRO] Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.
Dave Halliday
2006-01-26 20:40:01 UTC
RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.
Darren Lucke
2006-01-26 20:56:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: Windows OS .... troubles and can't access my cad files - BACKUP yours.