RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.

I haven't followed all of the messages but...

Why not just remove your disk drive and attach it to the other computer and
copy the needed files (assuming that both are running W2K or XP)? If the
file structure is not damaged this will work perfectly and you'll still have
the disk to attempt recovery without fear that you'll lose data.

>-----Original Message-----
>From: CAD_CAM_EDM_DRO@yahoogroups.com
>[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Darren Lucke
>Sent: January 25, 2006 23:44
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my
>cad files - BACKUP yours.
>
>
>Well.. I'm still stumped. I've gone through steps on
>ozzu.com and it says file copied but it still comes up
>w/ same error. My disks are recovery original install
>disks from HP (not 2000 OS).
>
>I have a feeling I need to break down and buy Windows
>2000 Pro in order to get the console recovery to work
>w/ repairs... Thanks for all the help fellas, I'll
>have to mess with it tomorrow again... good thing I
>have a backup comp w/ same system but no specific 2000
>pro on that one either just original install disks
>too.
>
>I slipped up.... I've lost at minimum 2 weeks worth of
>my CAD files up to this point. Listing back here so
>that you guys BACKUP your CAD FILES and don't be like
>me....
>
>No disc in A:\
>
>Anyone know where to get a 2000 pro recovery disk
>cheap? Anyone upgrade to XP that has old 2000 pro?
>
>Darren Lucke
>
>--- Dave Halliday <dh@...> wrote:
>
>> Quick heads up -- is there a floppy disk in drive A:
>>
>> This will also cause that error.
>>
>> Dave> >
>> > > Windows 2000 could not start because the
>> following file is
>> > missing or
>> > > corrupt: <windows><system32\ntoskrnl.exe.
>> > > Please reinstall a copy of the above file
>> >
>> >
>> > Anyhow, the Windows 2000 CD should have a recovery
>> option.
>> > I'd start there.
>> >
>> > Also, this forum is pretty good and the folks
>> there are very helpful:
>> >
>> > http://www.ozzu.com/ftopic24580.html
>> >
>> >
>> > Hope this helps,
>> >
>> > Chris
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam? Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... davemucha@...
>[Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>