RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and can't access my cad files - BACKUP yours.

Dang.

For some good diagnostic and recovery stuff, check out
http://www.sysinternals.com

They have a DOS utility that will read NTFS files from a DOS boot.
http://www.sysinternals.com/Utilities/NtfsDos.html

You may be able to back up your files with this.

Have you tried hitting [F8] just after the BIOS gets done? This should
bring up a menu offering different boot choices including Safe Mode.

If you need a DOS Boot disk, check out http://www.freedos.org/

DaveK's recommendations are also very good. Moving the drive into
another NTFS machine would be my first move.

Dave

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Darren Lucke
> Sent: Wednesday, January 25, 2006 8:44 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Windows OS .... troubles and
> can't access my cad files - BACKUP yours.
>
>
>
> Well.. I'm still stumped. I've gone through steps on
> ozzu.com and it says file copied but it still comes up
> w/ same error. My disks are recovery original install
> disks from HP (not 2000 OS).
>
> I have a feeling I need to break down and buy Windows
> 2000 Pro in order to get the console recovery to work
> w/ repairs... Thanks for all the help fellas, I'll
> have to mess with it tomorrow again... good thing I
> have a backup comp w/ same system but no specific 2000
> pro on that one either just original install disks
> too.
>
> I slipped up.... I've lost at minimum 2 weeks worth of
> my CAD files up to this point. Listing back here so
> that you guys BACKUP your CAD FILES and don't be like
> me....
>
> No disc in A:\
>
> Anyone know where to get a 2000 pro recovery disk
> cheap? Anyone upgrade to XP that has old 2000 pro?
>
> Darren Lucke
>
> --- Dave Halliday <dh@...> wrote:
>
> > Quick heads up -- is there a floppy disk in drive A:
> >
> > This will also cause that error.
> >
> > Dave> >
> > > > Windows 2000 could not start because the
> > following file is
> > > missing or
> > > > corrupt: <windows><system32\ntoskrnl.exe.
> > > > Please reinstall a copy of the above file
> > >
> > >
> > > Anyhow, the Windows 2000 CD should have a recovery
> > option.
> > > I'd start there.
> > >
> > > Also, this forum is pretty good and the folks
> > there are very helpful:
> > >
> > > http://www.ozzu.com/ftopic24580.html
> > >
> > >
> > > Hope this helps,
> > >
> > > Chris
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links