Re: [CAD_CAM_EDM_DRO] Wood Duck redux
Posted by
Codesuidae
on 2006-05-09 08:26:55 UTC
ballendo wrote:
six months. This sounds interesting if it can do some light work in
aluminum and brass and I can get it sans- motors and controller. The Z
axis 3-5/8" height sounds limiting, but I think the majority of the
items I work with fit into that. I would prefer to be able to fit
thicker items on the table, even if the working range was the same. For
example, I'd like to be able to put n 8 inch plank on it, work to a 3"
depth, then flip the plank and work on the other side.
reasonable.
motors and controller. This gives me the best machine at the end while
utilizing my time and skills to keep the cost down. It also helps
satisfy my desire to put stuff together and better understand the
machine, without frustrating me with too many details of parts selection
and fabrication.
Dave K
> What if you could just buy a FULL, COMPLETE kit for a 12x12x4-1/2"While I'm not currently in the market for a machine I will be in about
> travel Gantry router CNC machine, with plug-together electronics,
> and pre-configured PC-based cnc controller for $995?
>
six months. This sounds interesting if it can do some light work in
aluminum and brass and I can get it sans- motors and controller. The Z
axis 3-5/8" height sounds limiting, but I think the majority of the
items I work with fit into that. I would prefer to be able to fit
thicker items on the table, even if the working range was the same. For
example, I'd like to be able to put n 8 inch plank on it, work to a 3"
depth, then flip the plank and work on the other side.
> If I post pictures[...]I'd sure like to see some pictures :)
>
> The product now arrives fully ASSEMBLED in a 24x24x24 box, and isNot for me, I like assembling things, provided the documentation is
> made of Phenolic-faced Baltic Birch plywood. BUT it NOW costs $1450.
>
reasonable.
> OR... What if it was the same as described above fully assembled;I'd be most interested in the aluminum version, unassembled without
> BUT has a frame of 1/2" aluminum, and VXB linear bearings on 18mm
> rods in XY, and 16mm rods for Z. All else remains the same. But now
> it costs $1995.
>
motors and controller. This gives me the best machine at the end while
utilizing my time and skills to keep the cost down. It also helps
satisfy my desire to put stuff together and better understand the
machine, without frustrating me with too many details of parts selection
and fabrication.
Dave K
Discussion Thread
krashking405
2006-05-07 16:36:13 UTC
Plans for dirt cheap etcher?
Jon Elson
2006-05-07 17:32:24 UTC
Re: [CAD_CAM_EDM_DRO] Plans for dirt cheap etcher?
krashking405
2006-05-07 19:06:04 UTC
Re: Plans for dirt cheap etcher?
turbulatordude
2006-05-07 19:09:27 UTC
Re: Plans for dirt cheap etcher?
R Rogers
2006-05-07 19:11:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-07 19:52:50 UTC
Re: Plans for dirt cheap etcher?
Darren Lucke
2006-05-07 20:04:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
Jon Elson
2006-05-07 21:19:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
Alan Marconett
2006-05-08 08:13:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-08 15:03:59 UTC
Re: Plans for dirt cheap etcher?
turbulatordude
2006-05-08 21:08:03 UTC
Re: Plans for dirt cheap etcher?
ballendo
2006-05-08 22:23:00 UTC
Wood Duck redux was Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-09 02:21:50 UTC
Wood Duck redux was Re: Plans for dirt cheap etcher?
ballendo
2006-05-09 02:59:31 UTC
Wood Duck redux was Re: Plans for dirt cheap etcher?
Tony Jeffree
2006-05-09 03:53:53 UTC
Re: [CAD_CAM_EDM_DRO] Wood Duck redux was Re: Plans for dirt cheap etcher?
krashking405
2006-05-09 04:08:10 UTC
Wood Duck redux was Re: Plans for dirt cheap etcher?
krashking405
2006-05-09 04:10:08 UTC
Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-09 05:27:07 UTC
Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-09 05:28:29 UTC
Wood Duck redux was Re: Plans for dirt cheap etcher?
ballendo
2006-05-09 06:22:51 UTC
Wood Duck redux
turbulatordude
2006-05-09 06:54:19 UTC
Re: Plans for dirt cheap etcher?
Wayne Weedon
2006-05-09 07:05:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-09 07:10:16 UTC
Re: Wood Duck redux
turbulatordude
2006-05-09 07:13:33 UTC
Re: Wood Duck redux
ballendo
2006-05-09 07:25:23 UTC
Re: Wood Duck redux
ballendo
2006-05-09 07:36:16 UTC
Re: Wood Duck redux
Graham Stabler
2006-05-09 07:50:52 UTC
Wood Duck redux questionnaire answers:
R Rogers
2006-05-09 07:52:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux
ballendo
2006-05-09 08:03:12 UTC
Re: Wood Duck redux questionnaire answers:
ballendo
2006-05-09 08:14:09 UTC
Re: Wood Duck redux
Steve Stallings
2006-05-09 08:21:56 UTC
Re: Wood Duck redux
Codesuidae
2006-05-09 08:26:55 UTC
Re: [CAD_CAM_EDM_DRO] Wood Duck redux
ballendo
2006-05-09 08:40:19 UTC
Re: Wood Duck redux
turbulatordude
2006-05-09 08:56:42 UTC
Re: Wood Duck redux
ballendo
2006-05-09 08:56:57 UTC
Re: Wood Duck redux
turbulatordude
2006-05-09 09:04:34 UTC
Re: Wood Duck redux
Tony Jeffree
2006-05-09 09:34:55 UTC
Re: [CAD_CAM_EDM_DRO] Wood Duck redux questionnaire answers:
Alan Marconett
2006-05-09 09:53:59 UTC
[CAD_CAM_EDM_DRO] Re: routers
Graham Stabler
2006-05-09 10:16:59 UTC
Re: Wood Duck redux questionnaire answers:
lewis
2006-05-09 14:41:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux
krashking405
2006-05-09 14:55:13 UTC
Re: Plans for dirt cheap etcher?
krashking405
2006-05-09 15:08:23 UTC
Re: Plans for dirt cheap etcher?
turbulatordude
2006-05-09 16:08:56 UTC
Re: Wood Duck redux questionnaire answers: Hobbiest ?
turbulatordude
2006-05-09 16:20:24 UTC
Re: Plans for dirt cheap etcher?
turbulatordude
2006-05-09 16:27:53 UTC
Re: Plans for dirt cheap etcher?
Mariss Freimanis
2006-05-09 17:45:56 UTC
Re: Wood Duck redux questionnaire answers:
Stephen Wille Padnos
2006-05-09 17:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
Aaron
2006-05-09 18:42:14 UTC
Re: [CAD_CAM_EDM_DRO] Wood Duck redux
John Dammeyer
2006-05-09 19:16:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
Bill Vance
2006-05-09 22:26:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
delmar williams
2006-05-09 22:57:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
Mariss Freimanis
2006-05-09 23:04:28 UTC
Re: Wood Duck redux questionnaire answers:
abcv avde
2006-05-09 23:13:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
Tony Jeffree
2006-05-09 23:51:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
Bill Vance
2006-05-10 00:37:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire
ballendo
2006-05-10 00:47:29 UTC
Re: Wood Duck redux
ballendo
2006-05-10 00:53:58 UTC
Re: Plans for dirt cheap etcher?
ballendo
2006-05-10 01:01:48 UTC
OT Re: Wood Duck redux questionnaire answers:
delmar williams
2006-05-10 01:01:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire
ballendo
2006-05-10 01:03:56 UTC
OT Re: Wood Duck redux questionnaire answers:
Tony Jeffree
2006-05-10 01:15:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux
ballendo
2006-05-10 01:36:10 UTC
Re: Wood Duck redux
ballendo
2006-05-10 01:48:17 UTC
Re: Plans for dirt cheap etcher?
ballendo
2006-05-10 01:57:55 UTC
Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-10 06:38:19 UTC
Re: Plans for dirt cheap etcher?
Codesuidae
2006-05-10 08:17:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux
Aaron
2006-05-10 08:32:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux
Abby Katt
2006-05-10 09:07:52 UTC
Accordian cover/bellowy things for ballscrews?
Alan Marconett
2006-05-10 09:14:21 UTC
RE: [CAD_CAM_EDM_DRO] Modular Router, was Re: Wood Duck
Wayne Weedon
2006-05-10 09:23:45 UTC
Re: [CAD_CAM_EDM_DRO] Accordian cover/bellowy things for ballscrews?
John Dammeyer
2006-05-10 09:45:31 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
ballendo
2006-05-10 09:46:27 UTC
Re: Accordian cover/bellowy things for ballscrews?
Roy J. Tellason
2006-05-10 10:09:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Duck redux questionnaire answers:
JanRwl@A...
2006-05-10 12:29:26 UTC
Re: [CAD_CAM_EDM_DRO] Accordian cover/bellowy things for ballscrews?
Steve Blackmore
2006-05-10 15:14:37 UTC
Re: [CAD_CAM_EDM_DRO] Accordian cover/bellowy things for ballscrews?
Jack Hudler
2006-05-11 11:51:26 UTC
RE: [CAD_CAM_EDM_DRO] Accordian cover/bellowy things for ballscrews?
krashking405
2006-05-14 15:33:12 UTC
Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-15 02:29:54 UTC
Re: Plans for dirt cheap etcher?
krashking405
2006-05-15 15:19:55 UTC
Re: Plans for dirt cheap etcher?
Graham Stabler
2006-05-15 17:21:48 UTC
Re: Plans for dirt cheap etcher?
John Dammeyer
2006-05-15 18:01:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-15 18:26:31 UTC
Re: Plans for dirt cheap etcher?
Chuck Merja
2006-05-15 21:36:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-16 15:02:14 UTC
Re: Plans for dirt cheap etcher?
turbulatordude
2006-05-17 08:24:10 UTC
Re: Plans for dirt cheap etcher?
Alan Marconett
2006-05-17 10:47:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-17 14:49:46 UTC
Re: Plans for dirt cheap etcher?
Darren Lucke
2006-05-17 14:54:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Plans for dirt cheap etcher?
krashking405
2006-05-17 16:58:54 UTC
Re: Plans for dirt cheap etcher?