Re: [CAD_CAM_EDM_DRO] New member
Posted by
BRIAN FOLEY
on 2006-06-09 14:24:20 UTC
Hi, welcome, here is what i would do, got to a site like www.hobbycnc.com/
hit the links and start cruising the links. there is a lot to be learned.
another site for links www.artofcnc.ca/ home of master5cnc and mach1,2,3,4
there is a nice links section. do a search on the web for "homebuilt cnc"
will give you hours of stuff. cul brian f.
hit the links and start cruising the links. there is a lot to be learned.
another site for links www.artofcnc.ca/ home of master5cnc and mach1,2,3,4
there is a nice links section. do a search on the web for "homebuilt cnc"
will give you hours of stuff. cul brian f.
----- Original Message -----
From: "pasofinojls99" <pasofinojls99@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, June 09, 2006 2:11 PM
Subject: [CAD_CAM_EDM_DRO] New member
> Can anyone provide a new member and one just getting interested in
> CAD-CAM with a good article and its references discussing how to
> retrofit a Grizzly desk top mill to CAM. Also a suggested source for
> the electronics, motors,servos, and software.Hope this is not asking
> too much all at once. Thanks for any help
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/359 - Release Date: 6/8/06
>
>
Discussion Thread
Colin Robson
1999-05-20 10:54:49 UTC
New member
m_olszta@x...
1999-10-29 09:18:57 UTC
New member
GAUTAM BACHHAWAT
2001-01-21 09:05:16 UTC
New member
Les Watts
2001-01-21 10:53:52 UTC
Re: [CAD_CAM_EDM_DRO] New member
Smoke
2001-01-21 12:41:34 UTC
Re: [CAD_CAM_EDM_DRO] New member
GAUTAM BACHHAWAT
2001-01-22 22:35:20 UTC
Re: [CAD_CAM_EDM_DRO] New member
Smoke
2001-01-22 22:57:25 UTC
Re: [CAD_CAM_EDM_DRO] New member
GAUTAM BACHHAWAT
2001-01-22 23:01:09 UTC
Re: [CAD_CAM_EDM_DRO] New member
Angelos
2001-12-27 15:00:56 UTC
New member
aerobscure
2003-01-29 14:52:42 UTC
New member
ballendo <ballendo@y...
2003-01-31 07:03:19 UTC
Re: New member
drusso59
2003-07-26 06:51:40 UTC
New member
Tim Goldstein
2003-07-26 07:07:43 UTC
RE: [CAD_CAM_EDM_DRO] New member
Charles Hixon
2003-07-26 08:34:28 UTC
Re: New member
alanenourse
2004-10-15 16:33:05 UTC
New member
pasofinojls99
2006-06-09 12:55:32 UTC
New member
BRIAN FOLEY
2006-06-09 14:24:20 UTC
Re: [CAD_CAM_EDM_DRO] New member
wanliker@a...
2006-06-09 16:14:19 UTC
New member
wanliker@a...
2006-06-09 16:54:13 UTC
New member
DEN SWEENEY
2006-06-13 04:59:03 UTC
Re: [CAD_CAM_EDM_DRO] New member
Nigel Lawton
2007-06-20 06:58:00 UTC
New member
Graham Stabler
2007-06-20 08:09:33 UTC
Re: New member
Alan KM6VV
2007-06-20 08:20:07 UTC
RE: [CAD_CAM_EDM_DRO] New member
Nigel Lawton
2007-06-20 18:48:10 UTC
Re: New member
Nigel Lawton
2007-06-20 18:50:34 UTC
Re: New member
Alan KM6VV
2007-06-20 19:35:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: New member
Graham Stabler
2007-06-21 01:40:40 UTC
Re: New member
Graham Stabler
2007-06-21 01:59:43 UTC
Re: New member
gawnca
2007-06-21 05:42:13 UTC
Re: New member
Jeff Demand
2007-06-21 09:05:31 UTC
Re: New member
Nigel Lawton
2007-06-22 06:30:17 UTC
Re: New member
Nigel Lawton
2007-06-22 06:30:20 UTC
Re: New member