CAD CAM EDM DRO - Yahoo Group Archive

Re: Looking for mini-VFD for 120VAC/1ph

Posted by ballendo
on 2006-08-05 11:29:13 UTC
Doug,

Bypass the internal speed control, and then use the 30 buck unit...

(You may be able to "tweak" the internal unit to get more variation,
As one reply up ahead mentions; RIGID likely limitied it to keep the
torque high enough for expected tooling.)

Hope this helps,

Ballendo

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Doug Fortune <pentam@...>
wrote:
>
>
> Can anyone suggest a mini-VFD variable frequency drive
> for 120VAC/single phase, suitable for varying the speed
> of (variable speed) laminate trimmers such as the Ridgid R2400?
>
> The standard $30 variable speed controls don't work at all
> on this laminate trimmer, and the built-in control on the R2400
> only varies from 20,000 rpm to 30,000 rpm, which is not slow enough.
>
> cheers
> Doug Fortune
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> .
>

Discussion Thread

TheDragonPit 1999-09-22 05:29:43 UTC L297/L298 Phil Mattison 2006-08-04 08:53:05 UTC L297/L298 vrsculptor 2006-08-04 09:18:58 UTC Re: L297/L298 Jon Elson 2006-08-04 09:42:09 UTC Re: [CAD_CAM_EDM_DRO] L297/L298 Lester Caine 2006-08-04 09:46:23 UTC Re: [CAD_CAM_EDM_DRO] L297/L298 Wayne C. Gramlich 2006-08-04 10:34:25 UTC Re: L297/L298 Phil Mattison 2006-08-04 11:17:44 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 Lester Caine 2006-08-04 12:51:33 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 John Dammeyer 2006-08-04 13:22:58 UTC RE: [CAD_CAM_EDM_DRO] Re: L297/L298 Sebastien Bailard - Dubsen 2006-08-04 14:18:42 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 JanRwl@A... 2006-08-04 14:55:31 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 ballendo 2006-08-04 15:07:45 UTC Re: L297/L298 And a "correction" Alan Marconett 2006-08-04 15:18:52 UTC RE: [CAD_CAM_EDM_DRO] L297/L298 John Dammeyer 2006-08-04 15:29:14 UTC RE: [CAD_CAM_EDM_DRO] Re: L297/L298 Phil Mattison 2006-08-04 16:49:22 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Doug Fortune 2006-08-04 17:27:23 UTC Looking for mini-VFD for 120VAC/1ph Lee Studley 2006-08-04 20:17:14 UTC Re: Looking for mini-VFD for 120VAC/1ph afogassa 2006-08-04 20:33:32 UTC Re: Looking for mini-VFD for 120VAC/1ph caudlet 2006-08-04 21:11:38 UTC Re: Looking for mini-VFD for 120VAC/1ph P. J. Hicks 2006-08-04 21:41:10 UTC Cameras JanRwl@A... 2006-08-04 21:57:27 UTC Re: [CAD_CAM_EDM_DRO] Looking for mini-VFD for 120VAC/1ph JanRwl@A... 2006-08-04 22:11:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Looking for mini-VFD for 120VAC/1ph Peter Reilley 2006-08-05 06:16:17 UTC Re: [CAD_CAM_EDM_DRO] Cameras caudlet 2006-08-05 07:06:17 UTC Re: Looking for mini-VFD for 120VAC/1ph Doug Fortune 2006-08-05 08:38:59 UTC Re: Looking for mini-VFD for 120VAC/1ph Alan Marconett 2006-08-05 09:20:33 UTC Re: [CAD_CAM_EDM_DRO] Looking for mini-VFD for 120VAC/1ph turbulatordude 2006-08-05 09:35:13 UTC Re: Looking for mini-VFD for 120VAC/1ph ballendo 2006-08-05 11:26:45 UTC Re: L297/L298 And a "correction" ballendo 2006-08-05 11:29:13 UTC Re: Looking for mini-VFD for 120VAC/1ph ballendo 2006-08-05 11:31:37 UTC OT Re: Looking for mini-VFD for 120VAC/1ph Wayne C. Gramlich 2006-08-07 20:50:07 UTC Re: L297/L298 Phil Mattison 2006-08-08 07:31:40 UTC Re: L297/L298 Lester Caine 2006-08-08 11:58:18 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 Wayne C. Gramlich 2006-08-08 21:13:53 UTC Re: L297/L298 And a "correction" Mariss Freimanis 2006-08-08 21:34:55 UTC Re: L297/L298 And a "correction" ballendo 2006-08-08 22:01:43 UTC Re: L297/L298 And a "correction" Jon Elson 2006-08-08 22:53:03 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Wayne C. Gramlich 2006-08-09 10:01:20 UTC Re: L297/L298 And a "correction" John Dammeyer 2006-08-09 10:17:28 UTC RE: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Alan Marconett 2006-08-09 10:47:18 UTC RE: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Wayne C. Gramlich 2006-08-11 22:18:42 UTC Re: L297/L298 And a "correction" Lester Caine 2006-08-11 23:01:02 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Wayne C. Gramlich 2006-08-13 11:00:29 UTC Re: L297/L298 And a "correction" Lester Caine 2006-08-13 13:03:35 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Steve Blackmore 2006-08-13 16:53:12 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Lester Caine 2006-08-13 23:05:15 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction" Vlad Krupin 2006-09-01 22:47:16 UTC Re: [CAD_CAM_EDM_DRO] L297/L298 turbulatordude 2006-09-02 08:53:04 UTC Re: L297/L298 Vlad Krupin 2006-09-02 22:16:37 UTC Re: [CAD_CAM_EDM_DRO] Re: L297/L298