OT Re: Looking for mini-VFD for 120VAC/1ph
Posted by
ballendo
on 2006-08-05 11:31:37 UTC
Lee, What an excellent suggestion!<G>
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lee Studley"
<indigo_red@...> wrote:
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lee Studley"
<indigo_red@...> wrote:
>work.
> Hi Doug,
> The built in control is ( in my guess )an inductive load capable
> diac + triac dimmer type control. You'll probably have to take the
> trimmer apart, bypass the control. Usually this is a simple as a
> 2 wire join: to bypass the "dimmer", then your $30 unit should
>
> I think its failing to work so far due to having 2 "dimmers" in
> series ( with the $30 speed control running the router speed
> control ), so neither can get proper triggering off of the AC zero
> crossings.
>
> -Lee
Discussion Thread
TheDragonPit
1999-09-22 05:29:43 UTC
L297/L298
Phil Mattison
2006-08-04 08:53:05 UTC
L297/L298
vrsculptor
2006-08-04 09:18:58 UTC
Re: L297/L298
Jon Elson
2006-08-04 09:42:09 UTC
Re: [CAD_CAM_EDM_DRO] L297/L298
Lester Caine
2006-08-04 09:46:23 UTC
Re: [CAD_CAM_EDM_DRO] L297/L298
Wayne C. Gramlich
2006-08-04 10:34:25 UTC
Re: L297/L298
Phil Mattison
2006-08-04 11:17:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298
Lester Caine
2006-08-04 12:51:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298
John Dammeyer
2006-08-04 13:22:58 UTC
RE: [CAD_CAM_EDM_DRO] Re: L297/L298
Sebastien Bailard - Dubsen
2006-08-04 14:18:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298
JanRwl@A...
2006-08-04 14:55:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298
ballendo
2006-08-04 15:07:45 UTC
Re: L297/L298 And a "correction"
Alan Marconett
2006-08-04 15:18:52 UTC
RE: [CAD_CAM_EDM_DRO] L297/L298
John Dammeyer
2006-08-04 15:29:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: L297/L298
Phil Mattison
2006-08-04 16:49:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Doug Fortune
2006-08-04 17:27:23 UTC
Looking for mini-VFD for 120VAC/1ph
Lee Studley
2006-08-04 20:17:14 UTC
Re: Looking for mini-VFD for 120VAC/1ph
afogassa
2006-08-04 20:33:32 UTC
Re: Looking for mini-VFD for 120VAC/1ph
caudlet
2006-08-04 21:11:38 UTC
Re: Looking for mini-VFD for 120VAC/1ph
P. J. Hicks
2006-08-04 21:41:10 UTC
Cameras
JanRwl@A...
2006-08-04 21:57:27 UTC
Re: [CAD_CAM_EDM_DRO] Looking for mini-VFD for 120VAC/1ph
JanRwl@A...
2006-08-04 22:11:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Looking for mini-VFD for 120VAC/1ph
Peter Reilley
2006-08-05 06:16:17 UTC
Re: [CAD_CAM_EDM_DRO] Cameras
caudlet
2006-08-05 07:06:17 UTC
Re: Looking for mini-VFD for 120VAC/1ph
Doug Fortune
2006-08-05 08:38:59 UTC
Re: Looking for mini-VFD for 120VAC/1ph
Alan Marconett
2006-08-05 09:20:33 UTC
Re: [CAD_CAM_EDM_DRO] Looking for mini-VFD for 120VAC/1ph
turbulatordude
2006-08-05 09:35:13 UTC
Re: Looking for mini-VFD for 120VAC/1ph
ballendo
2006-08-05 11:26:45 UTC
Re: L297/L298 And a "correction"
ballendo
2006-08-05 11:29:13 UTC
Re: Looking for mini-VFD for 120VAC/1ph
ballendo
2006-08-05 11:31:37 UTC
OT Re: Looking for mini-VFD for 120VAC/1ph
Wayne C. Gramlich
2006-08-07 20:50:07 UTC
Re: L297/L298
Phil Mattison
2006-08-08 07:31:40 UTC
Re: L297/L298
Lester Caine
2006-08-08 11:58:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298
Wayne C. Gramlich
2006-08-08 21:13:53 UTC
Re: L297/L298 And a "correction"
Mariss Freimanis
2006-08-08 21:34:55 UTC
Re: L297/L298 And a "correction"
ballendo
2006-08-08 22:01:43 UTC
Re: L297/L298 And a "correction"
Jon Elson
2006-08-08 22:53:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Wayne C. Gramlich
2006-08-09 10:01:20 UTC
Re: L297/L298 And a "correction"
John Dammeyer
2006-08-09 10:17:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Alan Marconett
2006-08-09 10:47:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Wayne C. Gramlich
2006-08-11 22:18:42 UTC
Re: L297/L298 And a "correction"
Lester Caine
2006-08-11 23:01:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Wayne C. Gramlich
2006-08-13 11:00:29 UTC
Re: L297/L298 And a "correction"
Lester Caine
2006-08-13 13:03:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Steve Blackmore
2006-08-13 16:53:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Lester Caine
2006-08-13 23:05:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298 And a "correction"
Vlad Krupin
2006-09-01 22:47:16 UTC
Re: [CAD_CAM_EDM_DRO] L297/L298
turbulatordude
2006-09-02 08:53:04 UTC
Re: L297/L298
Vlad Krupin
2006-09-02 22:16:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: L297/L298