Re: PO BOY Water Jetter ????

Someone sells an add-on kit for a Bridgport. the pump and all the
works so you can use your existing CNC machine to run parts.

It is well constructed from what I can tell, and it looks like it is
turn-key.

Not sure of the cost though.

Dave




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ken Campbell" <deltainc@...>
wrote:

>
> Hi peeples: we are a ma/pa shop that occasionally cuts some thin ( 1/8
> inch ) graphite/composite sheet the hard way ... with an old Boss4
> Bridgeport and a speeder head at about 10 K rpm with a 1/8 carbide

pin that

> has to be replaced about every 30 inches.
>
> Cant afford a pro water jet cutter, but it seems there should be

some way to

> crutch up a head that could go on a DIY xy (z? ) table to do

lightweight

> water cutting .......
>
> ***********
>
> If seals are the $$$$ problem, how about encapsulating a cam-push pump
> inside a reservoir and just let it leak a little bit ...
>
> ... if need be, the injection could be timed with the software to
> synchronize with the stepper movement to give a smoother cut ...
>
> how about using fuel injection injectors or bodies for the jet

nozzles? pop

> pop pop ... hey, we are talking PO BOYS Crutched Up Miracle Machine

here ...

>
> *******
> Heh, if any of you have ever routed graphite sheet, you will

understand the

> desperation to find a better way. dirty itchy dangerous to lungs ...
>
> Anyone solved this already ???
>
> regards, ken campbell, deltainc-usa.com
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.3/423 - Release Date:

8/18/2006

>