Re: Lead screws and mill dust
Posted by
turbulatordude
on 2006-11-26 11:51:31 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Frank" <ftkalcevic@...> wrote:
here is a the above in a TUNYurl from tinyurl.com
http://tinyurl.com/y5jg9m
>heck of a time with the cut url can cut an paste.
> I've been experimenting with making my own bellows. There is an
> interesting patent, #6054194, (link below) which describes the optimal
> fold patterns for a bellows made from a single sheet of material. The
> patent shows how to minimise the shape distortion as the bellows
> expands and contracts. Once folded, it holds its shape very well.
>
> I've experimented with polypropylene sheet, as it has great "hinge"
> characteristics. I started with some document folders from my local
> office supplier to test different thickness of the plastic. I found
> the thinner the better. I CADed up the pattern, printed it, then lay
> the polypropylene over the sheet (the polypropylene I have is
> translucent). I then used a scriber to scratch the fold lines and
> fold the bellows.
>
> Only yesterday I found polypropylene sheet sold by my local art supply
> place - 1200x600x0.39mm sheets. Today I am planning to make a new tip
> for my soldering iron and a guide so I can melt the fold lines into
> the plastic instead of soldering. If that works, I will make the full
> bellows.
>
>
>
> patent link - http://patft.uspto.gov/netacgi/nph-Parser?
> Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-
> bool.html&r=1&f=G&l=50&co1=AND&d=PTXT&s1=6054194.PN.&OS=PN/6054194&RS=P
> N/6054194
>
here is a the above in a TUNYurl from tinyurl.com
http://tinyurl.com/y5jg9m
Discussion Thread
wdavis364
2006-11-22 03:55:58 UTC
Lead screws and mill dust
John Hansford
2006-11-22 04:34:27 UTC
Re: Lead screws and mill dust
Mark Vaughan
2006-11-22 05:17:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
Leslie Newell
2006-11-22 05:24:21 UTC
Re: [CAD_CAM_EDM_DRO] Lead screws and mill dust
Bill Davis
2006-11-22 06:03:13 UTC
Re: [CAD_CAM_EDM_DRO] Lead screws and mill dust
Bill Davis
2006-11-22 06:38:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
Bill Davis
2006-11-22 06:48:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
cnc002@a...
2006-11-22 07:30:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
Bill Davis
2006-11-22 10:10:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
John Hansford
2006-11-22 10:29:06 UTC
Re: Lead screws and mill dust
Wayne Weedon
2006-11-22 10:51:32 UTC
Re: [CAD_CAM_EDM_DRO] Lead screws and mill dust
Bill Davis
2006-11-22 11:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
John Hansford
2006-11-22 11:40:58 UTC
Re: Lead screws and mill dust
BRIAN FOLEY
2006-11-22 13:25:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
John Hansford
2006-11-22 14:28:06 UTC
Re: Lead screws and mill dust
Jon Elson
2006-11-22 17:29:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
turbulatordude
2006-11-23 07:25:35 UTC
Re: Lead screws and mill dust
Bryan Waldron
2006-11-23 08:04:55 UTC
Re: Lead screws and mill dust
ED MAISEY
2006-11-23 11:21:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
Frank
2006-11-25 12:02:50 UTC
Re: Lead screws and mill dust
turbulatordude
2006-11-26 11:51:31 UTC
Re: Lead screws and mill dust
Paul Alciatore
2006-11-27 21:52:06 UTC
Re:Lead screws and mill dust
Brian Lindsay
2006-11-28 08:35:23 UTC
Re:Lead screws and mill dust
a1a5115
2006-11-28 12:05:40 UTC
Re: Lead screws and mill dust
caudlet
2006-11-28 13:31:03 UTC
Re:Lead screws and mill dust
Frank
2006-12-06 02:36:41 UTC
Re: Lead screws and mill dust
John Hansford
2006-12-06 03:04:02 UTC
Re: Lead screws and mill dust
JCullins
2006-12-06 05:19:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
Andy Wander
2006-12-06 05:23:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
John Hansford
2006-12-06 05:36:52 UTC
Re: Lead screws and mill dust
JCullins
2006-12-06 06:55:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust
John Dammeyer
2006-12-06 08:09:31 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lead screws and mill dust