Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Posted by
Drew Rogge
on 2000-10-02 12:37:12 UTC
Thanks Lee. I remember seeing the kits when I was looking for
some cable to make my phase converter (not an entire success
yet). I also chose George Carlson's version for the auto start
potential relay but balance the phases using info from:
http://home.att.net/~waterfront-woods/Articles/phaseconverter.htm
Until I find a 5 hp idler I'm using the setup as a static converter.
The reason that the setup isn't a complete success is that the
start cap will be switched in real nice if the 3-phase switch
between the converter and the motor is on when I switch the converter
on but, if I turn off the motor at the 3-phase switch, the potential
relay stays open. This means that the start cap doesn't kick in
when I switch the motor back on. This would be fine with a rotary
converter since you aren't turning them on and off all the time.
Drew
some cable to make my phase converter (not an entire success
yet). I also chose George Carlson's version for the auto start
potential relay but balance the phases using info from:
http://home.att.net/~waterfront-woods/Articles/phaseconverter.htm
Until I find a 5 hp idler I'm using the setup as a static converter.
The reason that the setup isn't a complete success is that the
start cap will be switched in real nice if the 3-phase switch
between the converter and the motor is on when I switch the converter
on but, if I turn off the motor at the 3-phase switch, the potential
relay stays open. This means that the start cap doesn't kick in
when I switch the motor back on. This would be fine with a rotary
converter since you aren't turning them on and off all the time.
Drew
On Oct 2, 7:04pm, Lee Studley wrote:
> Subject: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20
> Drew,
>
> They had the NEMA four pin locking 20A connectors male to female on
> each end.(I priced the conns. separately there at ~$13 each.)
> I'll ohm them out and take apart to see if all four conductors are
> used, and post the part# when I get home. I'm in Arizona, so I
> hope doesn't end up being just a regional thing.
>
> -Lee
>
>
> --- In CAD_CAM_EDM_DRO@egroups.com, Drew Rogge <drew@p...> wrote:
> > Lee,
> >
> > I'm going to stop my the local HD on my way home tonight but I'm
> > curious about how many connectors the plugs have. Is it three phase
> > plus ground or just the three hot leads?
> >
> > Drew
> >
> > On Oct 2, 6:35pm, Lee Studley wrote:
> > > Subject: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on
> conns/cables 20
> > > Carey,
> > > When I get home, I'll post the part number if it helps, but
> > > otherwise, sorry to send you on a wild goosechase.
> > >
> > > I guess mailing them out would kill the 'sale' portion of it...
> > > Thanks,
> > > Lee
> > >
> > > --- In CAD_CAM_EDM_DRO@egroups.com, "Carey L. Culpepper"
> <mr.c@b...>
> > > wrote:
> > > > Lee: It must be a regional thing. I just got back from HD and
> there
> > > was
> > > > no such animal. That is here in south Florida anyway.
> > > > Carey
> > >
> > >-- End of excerpt from Lee Studley
> >
> >
> >
> > --
> > Drew Rogge
> > drew@p...
>
>-- End of excerpt from Lee Studley
--
Drew Rogge
drew@...
Discussion Thread
Carey L. Culpepper
2000-10-02 11:06:58 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee Studley
2000-10-02 11:35:51 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Drew Rogge
2000-10-02 11:38:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee Studley
2000-10-02 12:04:21 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Drew Rogge
2000-10-02 12:37:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee Studley
2000-10-02 13:00:12 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Darrell
2000-10-02 13:47:41 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee & Chris studley
2000-10-02 19:17:52 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-02 19:43:17 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee & Chris studley
2000-10-02 20:01:07 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-02 20:13:39 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
cnc002@a...
2000-10-02 20:40:30 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
cnc002@a...
2000-10-02 20:43:14 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee & Chris studley
2000-10-02 20:44:17 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-02 20:59:52 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-02 21:16:54 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee & Chris studley
2000-10-02 21:42:19 UTC
Monster Audio Cable Deal???Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Hugh Prescott
2000-10-03 06:54:25 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Drew Rogge
2000-10-03 10:38:36 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
wanliker@a...
2000-10-03 12:00:55 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-03 15:03:29 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Drew Rogge
2000-10-03 15:32:37 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Barlow
2000-10-03 16:14:16 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
R. T. Robbins
2000-10-03 20:16:49 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Davis
2000-10-04 07:32:58 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Darrell
2000-10-04 09:59:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Davis
2000-10-04 21:30:39 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Darrell
2000-10-05 09:28:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Jeff Davis
2000-10-06 10:13:15 UTC
Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase
Lee & Chris studley
2000-10-08 11:17:05 UTC
Re: [CAD_CAM_EDM_DRO] FYI: Home Depot Good buy on conns/cables 20' 3Phase