Re: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on conns/cables 20' 3Phase

Yes, but they still bring the power in from the pole with 3
wires. 2 hots and a neutral. Then the neutral and the ground
are all connected together at the breaker box along with a
wire to earth ground.
Darrell

----- Original Message -----
From: "Jeff Davis" <jeff0124@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Tuesday, October 03, 2000 4:38 PM
Subject: [CAD_CAM_EDM_DRO] Re: FYI: Home Depot Good buy on
conns/cables 20' 3Phase


> 2 hots
> 1 neutral
> 1 ground
>
> It's a new rule.
>
> Jeff Davis
>
>
> <Why would you need a 4 wire connector for single phase
power? And if the
> <connector is indeed rated for 240 volts then it will work
just fine
> whether
> <the power is 3 phase or single phase. As long as you
don't exceed the
> <current rating or voltage rating it is perfectly safe
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list
for the discussion of shop built systems, for CAD, CAM, EDM,
and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com,
wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page:
http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>