Re: [CAD_CAM_EDM_DRO] virtual hand jive
Posted by
Alan Marconett KM6VV
on 2000-11-06 12:51:25 UTC
Rick,
The three goldmine encoders sound like a good idea (missed getting mine
8>( ), however I think you will want to stay in CNCpro, not exit it to
run manual. SO, we need to get encoder inputs INTO CNCpro, (MaxNC, any
chance?), or whatever control program. I had thought that a TSR program
could watch the encoder(s) on timer ticks, and add the appropriate keys
into the keyboard buffer, but as has been mentioned, the overflow could
kill ya! The TSR could still help to map a keyboard pendent into
program keys :>)
The "orthogonal directions" sounds interesting, put the encoder knobs
(handwheels) on three mutually perpendicular axis? ...And I was just
going to add a jog knob (with led's to remind me which axis I was
jogging, and selection p/b's)!
Alan
Rick Dulas wrote:
The three goldmine encoders sound like a good idea (missed getting mine
8>( ), however I think you will want to stay in CNCpro, not exit it to
run manual. SO, we need to get encoder inputs INTO CNCpro, (MaxNC, any
chance?), or whatever control program. I had thought that a TSR program
could watch the encoder(s) on timer ticks, and add the appropriate keys
into the keyboard buffer, but as has been mentioned, the overflow could
kill ya! The TSR could still help to map a keyboard pendent into
program keys :>)
The "orthogonal directions" sounds interesting, put the encoder knobs
(handwheels) on three mutually perpendicular axis? ...And I was just
going to add a jog knob (with led's to remind me which axis I was
jogging, and selection p/b's)!
Alan
Rick Dulas wrote:
>
> Howdy All! It does my heart to see this thread continue in such a lively manner. Instead of trying to interface to the jog system,
> I'm going to try a dual control input to the stepper drivers. A quadrature encoder with a handwheel will put out step and dir. When
> I'm in manual mode the step and dir from the encoder will go to both the stepper drivers and to the PC which is running a simple
> counter program. This, as yet uncoded, program will be a DRO and tell me where the tool is in relation to the table.
>
> In CNC mode, the step and dir signals go directly from CNCpro to the steppers. As for the UI, I've already suspended the monitor
> from a stanchion and it has a keyboard attached. The manual control wheels will be 3 goldmine motors with the magnets removed and
> mounted in an aluminum project box in their orthogonal directions. This box will be mounted below the monitor on a slide and pulled
> out when needed.
>
> Will all this work? I don't know yet. Is it worth it to a production shop, probably not. The small programs that Jon E has put
> together will probably suffice for most pro and semi-pro operations. But I run a strictly amature shop and am still learning what I
> can do with a mill. For me, being able to "hand crank" the tool through the job is an invaluable part of my education.
>
> jmw@... wrote:
>
> [comments about bending some poor guy's ear snipped]
>
> > Sounds like all the fun would be interfacing the virtual wheel with the jog system.
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
Discussion Thread
jmw@c...
2000-11-06 12:03:23 UTC
virtual hand jive
Jon Anderson
2000-11-06 12:20:56 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
Rick Dulas
2000-11-06 12:32:48 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
Alan Marconett KM6VV
2000-11-06 12:51:25 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
Wally K
2000-11-06 12:57:25 UTC
Re: virtual hand jive
Anne Ogborn
2000-11-06 13:00:11 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
Joe Vicars
2000-11-06 13:16:50 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
Smoke
2000-11-06 13:42:17 UTC
Re: [CAD_CAM_EDM_DRO] virtual hand jive
jmw@c...
2000-11-06 13:43:46 UTC
Re: virtual hand jive
Alan Marconett KM6VV
2000-11-06 18:47:21 UTC
Re: virtual hand jive
ballendo@y...
2000-11-06 19:23:17 UTC
Re: virtual hand jive
Alan Marconett KM6VV
2000-11-06 20:09:02 UTC
Re: virtual hand jive
Anne Ogborn
2000-11-06 22:28:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: virtual hand jive
ballendo@y...
2000-11-07 01:22:23 UTC
Re: Re: virtual hand jive
Smoke
2000-11-07 06:42:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: virtual hand jive
Jon Anderson
2000-11-07 09:00:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: virtual hand jive
Andrew Werby
2000-11-07 10:08:55 UTC
Re: virtual hand jive
Alan Marconett KM6VV
2000-11-07 11:28:15 UTC
Re: virtual hand jive
Alan Marconett KM6VV
2000-11-07 11:36:57 UTC
Re: virtual hand jive
Jon Elson
2000-11-07 12:05:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: virtual hand jive
ballendo@y...
2000-11-07 14:14:28 UTC
Re: Re: virtual hand jive
Smoke
2000-11-07 15:45:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: virtual hand jive
ballendo@y...
2000-11-07 16:25:55 UTC
Re: virtual hand jive
ballendo@y...
2000-11-07 20:24:07 UTC
Re: Re: Re: virtual hand jive