CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion

Posted by Drew Rogge
on 2001-04-25 11:12:32 UTC
I haven't had a chance to try it but someone on alt.machines.cnc
suggested cutting something like a rough thread on the diameter
being turned before the normal cutting passes. The idea is that the
sprial groove that's created causes the chip to be broken up into
lenghts which are roughly the circumference of the part.

Sounded like a cool idea to me. Hopefully someday I'll have a CNC
lathe to try it on.

Drew

Jon Anderson wrote:
>
[snip]
> Yes, chips can be a problem. I didn't have any trouble with the nylon,
> heck it's almost impossible to break up a nylon chip on the lathe.
> Forgot he's talking about metal. Yeah, sucking chips between the
> bearings and stock isn't going to work too well...
>
> Jon
>

--
Drew Rogge
drew@...

Discussion Thread

stratton@m... 2001-04-24 19:13:57 UTC Swiss turning conversion dougrasmussen@c... 2001-04-24 19:35:23 UTC Re: Swiss turning conversion ptengin@a... 2001-04-24 19:46:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Jon Anderson 2001-04-24 20:07:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion dougrasmussen@c... 2001-04-24 20:42:24 UTC Re: Swiss turning conversion dougrasmussen@c... 2001-04-24 21:09:36 UTC Re: Swiss turning conversion stratton@m... 2001-04-24 21:34:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Jon Anderson 2001-04-24 23:37:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Jon Anderson 2001-04-24 23:40:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Ian Wright 2001-04-25 01:39:32 UTC Re: [CAD_CAM_EDM_DRO] Swiss turning conversion Sven Peter, TAD S.A. 2001-04-25 06:49:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Smoke 2001-04-25 07:35:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Jon Anderson 2001-04-25 08:55:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion dougrasmussen@c... 2001-04-25 10:07:23 UTC Re: Swiss turning conversion Jon Anderson 2001-04-25 11:00:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Drew Rogge 2001-04-25 11:12:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Smoke 2001-04-25 11:27:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion ptengin@a... 2001-04-25 14:14:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion ballendo@y... 2001-04-25 22:21:09 UTC Re: Swiss turning conversion Chris Paine 2001-04-27 16:45:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion Sven Peter, TAD S.A. 2001-04-27 20:48:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Swiss turning conversion