Re: [CAD_CAM_EDM_DRO] Re: Inserts in the home shop

Call them and ask them. Their threading insert is set up to use
standard holders. I m sure they would be quick to tell you. They
also have a large line of HSS stuff. I don't think the web page does
justice to the abilities they have. As they machine soft then heat
you can gey almost anything you want..

He suggested I make my own holders as a hobbiest..

Garry

To: CAD_CAM_EDM_DRO@yahoogroups.com
From: Jon Anderson <janders@...>
Date sent: Thu, 10 May 2001 16:20:11 -0700
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Inserts in the home shop

> Joe Vicars wrote:
> >
> > It is called a DIAMOND toolholder and it is pretty neat but not cheap.
>
> I guess that's technically an insert holder for HSS, but there's another
> one that uses triangular inserts.
> http://www.arwarnerco.com is the web site. This is much like the kits of
> 5 square shank holders most folks have seen with the carbide inserts,
> but these are HSS, use a screw in the center to hold them, come in
> either 3/8 or 1/2 sq shank, and inserts come in 1/32 or 1/64 radius.
>
> I'd sure like to know if his HSS inserts are compatible with the carbide
> shank versions sold elsewhere.
>
> Jon
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>