Re: [CAD_CAM_EDM_DRO] LPKF 2d drill

Hi Jerry, Zoran,

Thanks for the URL's. I didn't see much, however I did have a thought
for Zoran; see if can get a "sample file", with a few simple traces. If
the LPKF can be driven by the serial port, then someone with one
(perhaps LPKF), can "save to file" instead of running the drill.
Unless, of course, the "controller" (PCB layout program) needs to hear
back from the drill. If it will run "open end", then a series of "PA"
moves MAY be all you need.

Alan KM6VV


Jerry Kimberlin wrote:

>
> Alan Marconett KM6VV wrote:
> >
> > Hi Jerry, Zoran,
> >
> > There you go! Find the driver chips, and follow the app notes! I'm
> > still curious about the motors, and the driver chips. Know any URL's?
>
> I don't really have much in the way of URLs. Possibly the Vexta
> site would say something:
> http://orientalmotors.com/automated/product/vexta.htm
>
> The licence holder is:
> http://www.achssysteme.de/english/portal/portal.asp
>
> I can't say a think about the driver chips. Maybe there is a
> hint inside the Vexta site, but I doubt it. I haven't done a
> search on the chip's partial that Zoran mentioned and don't know
> if it would be worthwhile.
>
> JerryK