CAD CAM EDM DRO - Yahoo Group Archive

Stepper Dissasembly

on 2001-06-04 19:39:54 UTC
Quoting from the brochure included with an old "M" series
NEMA 34 Slo-Syn that was still in it's unopened box:

"Motors should not be taken apart. Removing the rotor will reduce the
output toruqe 5% or more when the motor is reassembled and the
permanent magnet will pick up steel chips"

Sounds like there are consequences, but it may be worthwhile to risk
them in circumstances where dissasembly seems necessary.

Next question: can a triple stack size 34 motor really be only 300
oz-in? M093-FD-339 - 300 oz in, 4.4v, 3.5A. Looking in the current
catalog, all the motors of this size and approximate wattage have the
same rating, 450 uni/550 bipoar for both windings on. I could imagine
the design improving somewhat since these left the factory, but 50%???

Won't really know till I hook them up to a drive. And yes, it is
going to be tempting to go in and rewire to run them bipolar-parallel.

Chris

--
Christopher C. Stratton, stratton@...
Instrument Maker, Horn Player & Engineer
22 Adrian Street, Somerville, MA 02143
http://www.mdc.net/~stratton
NEW PHONE NUMBER: (617) 628-1062 home, 253-2606 MIT

Discussion Thread

Chris Stratton 2001-05-29 16:25:14 UTC Stepper Dissasembly mariss92705@y... 2001-05-29 16:58:35 UTC Re: Stepper Dissasembly Alan Marconett KM6VV 2001-05-29 17:08:20 UTC Re: [CAD_CAM_EDM_DRO] Stepper Dissasembly stratton@m... 2001-05-29 17:08:30 UTC Re: Stepper Dissasembly Art Fenerty 2001-05-29 17:38:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly JanRwl@A... 2001-05-29 17:47:25 UTC Re: [CAD_CAM_EDM_DRO] Stepper Dissasembly JanRwl@A... 2001-05-29 17:51:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly stratton@m... 2001-05-29 17:51:47 UTC Re: Stepper Dissasembly Jerry Kimberlin 2001-05-29 18:03:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-29 18:26:36 UTC Re: Stepper Dissasembly Art Fenerty 2001-05-29 18:28:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly William Scalione 2001-05-29 18:29:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Art Fenerty 2001-05-29 18:32:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Art Fenerty 2001-05-29 18:37:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Chris Stratton 2001-05-29 18:38:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Jerry Kimberlin 2001-05-29 18:47:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-29 18:53:08 UTC Re: Stepper Dissasembly Art Fenerty 2001-05-29 19:06:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Carol & Jerry Jankura 2001-05-29 20:31:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Sven Peter, TAD S.A. 2001-05-29 20:51:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Jon Elson 2001-05-29 21:42:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly Jon Elson 2001-05-29 22:01:16 UTC Re: [CAD_CAM_EDM_DRO] Stepper Dissasembly brian 2001-05-30 04:13:39 UTC Re: [CAD_CAM_EDM_DRO] Stepper Dissasembly mariss92705@y... 2001-05-30 07:27:55 UTC Re: Stepper Dissasembly JanRwl@A... 2001-05-30 08:16:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-30 09:08:58 UTC Re: Stepper Dissasembly Tim Goldstein 2001-05-30 09:50:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-30 10:39:04 UTC Re: Stepper Dissasembly Jon Elson 2001-05-30 12:47:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-30 16:09:53 UTC Re: Stepper Dissasembly Jon Elson 2001-05-31 13:22:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-31 14:54:21 UTC Re: Stepper Dissasembly Chris Stratton 2001-05-31 17:50:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper Dissasembly mariss92705@y... 2001-05-31 19:50:16 UTC Re: Stepper Dissasembly Chris Stratton 2001-06-04 19:39:54 UTC Stepper Dissasembly Alan Marconett KM6VV 2001-06-04 21:23:48 UTC Re: [CAD_CAM_EDM_DRO] Stepper Dissasembly cncdxf@a... 2001-06-05 07:39:19 UTC Re: Stepper Dissasembly Alan Marconett KM6VV 2001-06-05 11:15:08 UTC Re: Stepper Dissasembly cncdxf@a... 2001-06-05 12:43:19 UTC Re: Stepper Dissasembly ballendo@y... 2001-06-05 18:01:39 UTC Re: Stepper Dissasembly Brian Pitt 2001-06-20 00:18:27 UTC PMDC Servo Dissasembly? brian 2001-06-20 15:39:24 UTC Re: [CAD_CAM_EDM_DRO] PMDC Servo Dissasembly?