Re: Motor Noise?
Posted by
cncdxf@a...
on 2001-06-21 18:09:11 UTC
Hi,
The quickest fix is to use an extention cord. Draw the power
for the cutter from the other leg of your power line. The
Triacs in the speed control are causing hash!
The quickest fix is to use an extention cord. Draw the power
for the cutter from the other leg of your power line. The
Triacs in the speed control are causing hash!
--- In CAD_CAM_EDM_DRO@y..., "phil" <philw3@h...> wrote:
> I'm using a router speed control with a small laminate style
trimmer and since installing the speed controller I've got problems
on my Z Axis with lost steps.
>
> If I remove the speed control then all works well.
>
> Any suggestions on how best to -
>
> a) reduce the noise from the speed controller and/or motor
> b) shield the steppers from the noise.
>
> thanks!
>
> Phil
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
phil
2001-06-21 17:48:03 UTC
Motor Noise?
cncdxf@a...
2001-06-21 18:09:11 UTC
Re: Motor Noise?
phil
2001-06-21 19:23:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motor Noise?
cncdxf@a...
2001-06-21 19:44:22 UTC
Re: Motor Noise?
Alan Marconett KM6VV
2001-06-21 20:02:12 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-21 20:21:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motor Noise?
Sven Peter, TAD S.A.
2001-06-21 20:26:11 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Jon Elson
2001-06-21 21:21:18 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-22 00:22:27 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
phil
2001-06-22 12:23:41 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Rich D.
2001-06-22 12:55:12 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
cncdxf@a...
2001-06-22 17:44:30 UTC
Re: Motor Noise?
Alan Marconett KM6VV
2001-06-22 18:17:15 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-22 19:05:29 UTC
Re: Motor Noise?
phil
2001-06-22 19:44:35 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-23 07:35:58 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-23 12:09:47 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-23 22:07:13 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-24 14:30:19 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-24 17:05:37 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-24 18:10:36 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
ptengin@a...
2001-06-25 20:03:45 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-25 20:09:04 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-25 20:47:51 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-25 22:09:30 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-26 21:40:27 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-27 10:30:10 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-27 21:39:00 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-28 10:44:15 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-28 20:33:29 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Alan Marconett KM6VV
2001-06-28 23:33:13 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?
Sven Peter, TAD S.A.
2001-06-29 06:53:24 UTC
Re: [CAD_CAM_EDM_DRO] Motor Noise?