Re: [CAD_CAM_EDM_DRO] Motor Noise?

Hello Allan,
Am iI right that it is most probable that I would have trouble
if I use a mini PLC and it will be safer to go with a relais control?
Thank you very much for your patience.
Sven Peter


Alan Marconett KM6VV wrote:

> Hi Sven,
>
> Good luck! Sounds like a pain to have to do 12 relays, and more solid
> state relays. I'll bet you DON'T have to solder. Use crimp on terminal
> lugs! Let us know how it comes out!
>
> Alan KM6VV
>
> "Sven Peter, TAD S.A." wrote:
> >
> > Hello Alan,
> > I think the two oportunities i have on this machine are:
> > If I use the mini PLC use shielded wire and put ferrite beeds on the wires
> > or simply make it like with the othe machine I modified, where I made the whole
> > control thing with small auxiliary relais. But this time I will need at least
> > some 12 relais and the solid state relais.
> > By the way my soldering is awfull and will take more time than programing.
> > Lets see.
> > Sven Peter
> >
> > Alan Marconett KM6VV wrote:
> >
> > > Hi Sven,

[Non-text portions of this message have been removed]