Re: [CAD_CAM_EDM_DRO] Motor Noise?

Hi Sven,

The Handbook comes out every year. I grabbed the 2000 Handbook (1200
pages), and ISBN is:

0-87259-183-2

ARRL's URL is:

http://www.arrl.org/

Alan KM6VV



"Sven Peter, TAD S.A." wrote:

>
> Alan,
> where can I get it? Do you have the IBSN no.?
> My book from studies never arrived in Costa Rica. (some 500Kg)
> The environment in deed is rough. And on top as an i - dot we have a lot of dust
> that enters everywhere.
> Sven Peter
>
> Alan Marconett KM6VV wrote:
>
> > Hi Sven,
> >
> > Sorry, I didn't to "loose" you in my comments. Since you are working
> > with what is basically an "HF" transmitter, then I'd suggest checking
> > out "transmitter shielding", again, it's in the A.R.R.L handbook (for
> > ham radio).
> >
> > That sounds like a pretty rough environment for a PLC! Shielded boxes,
> > with feed-throughs for power and control lines are probably in order.
> >
> > Alan KM6VV
> >
> > "Sven Peter, TAD S.A." wrote:
> > >
> > > Hello Alan,
> > > my ears cling. If at all I understood a forth of your post!
> > > Here my application:
> > > I have a centrifuge for chrome-colbalt casting that works with
> > > pulsed (1,3 to 1,5Mhz) induction current (4500VDC)
> > > for to melt the metal.
> > > (Brand german Dentaurum, type Megapuls D100)
> > > The trouble with it is that the induction sparks and the high humidity
> > > in Costa Rica turn this thing, that never fails in Europe into
> > > a nerve killing trouble maker. The secretary of that odontologic
> > > laboratory calls me: "911"
> > > My plan is to use a Siemens LOGO mini-PLC (120VAC, currents in mA area)
> > > for control tasks and put together to the main contactor a few solid state relays.
> > > These STR will eliminate the damn sparks of the 4KW-transformer
> > > and by the way I can supervise all elementary functions.
> > > Sven Peter
> > >
> > > Alan Marconett KM6VV wrote:
> > >
> > > > Hi Sven,
> > > >
> > > > Yeah, you need either sintered or ferrite. Oftentimes you can keep RF
> > > > out of stuff by getting an old TV deflection yoke, and wrapping turns
> > > > around that!
> > > >
> > > > Lets see, if you're trying to "keep the RF in", then one can usually
> > > > turn on a TV or radio, and see what "works" (add a few beads, try a few
> > > > toroids). To keep RF out of a circuit is a little tougher. What wires
> > > > go into/out of the "box"? DC power lines can be bypassed with caps,
> > > > beads/toroid chokes can be added, and then you somehow need to get a
> > > > 'scope probe in to see if RF is getting in. A little harder. Perhaps a
> > > > bulkhead BNC, with a short wire "probe" antenna INSIDE the box; to
> > > > couple out some signal to a 'scope. Check out the "ARRL handbook",
> > > > there are chapters on shielding and filtering, and probably some
> > > > suggested values of parts.
> > > >
> > > > If you have the power supply inside the box, then try a CORCOM filter on
> > > > the AC leads.
> > > >
> > > > There should be some data sheets on the Amidon products on the web
> > > > sites, these will give you the freq. ranges for the various beads and
> > > > toroids. Or call them!
> > > >
> > > > Hope this helps!
> > > >
> > > > Alan KM6VV
> > > >
> > > > "Sven Peter, TAD S.A." wrote:
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> [Non-text portions of this message have been removed]
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/