RE: [CAD_CAM_EDM_DRO] Encoder question
Posted by
Scott M. Thomas
on 2001-07-23 09:56:48 UTC
A 5 volt Zener diode and a 10k resistor would work.
-----Original Message-----
From: F. de Beer [mailto:f.debeer@...]
Sent: Saturday, July 21, 2001 2:39 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Encoder question
List,
I have got some nice encoders from Baumer. I want to use them in combination
with the gecko 320
The input of the encoder is 10-30 V. What is the best way to reduce the
output signals to TTL level.
Thanks in advance.
Frank de Beer
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-----Original Message-----
From: F. de Beer [mailto:f.debeer@...]
Sent: Saturday, July 21, 2001 2:39 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Encoder question
List,
I have got some nice encoders from Baumer. I want to use them in combination
with the gecko 320
The input of the encoder is 10-30 V. What is the best way to reduce the
output signals to TTL level.
Thanks in advance.
Frank de Beer
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Robert
2000-06-13 16:10:41 UTC
Encoder question
F. de Beer
2001-07-21 11:33:47 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Jon Elson
2001-07-21 15:47:57 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Scott M. Thomas
2001-07-23 09:56:48 UTC
RE: [CAD_CAM_EDM_DRO] Encoder question
babinda01
2005-04-04 04:16:38 UTC
Encoder question
Jon Elson
2005-04-04 09:49:53 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Roy J. Tellason
2005-04-04 10:49:17 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Jon Elson
2005-04-04 22:47:40 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
cnc002@a...
2005-04-05 07:39:29 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Mcginnis, Darrell S
2005-05-17 16:00:56 UTC
RE: [CAD_CAM_EDM_DRO] Encoder question
BRIAN FOLEY
2006-03-08 14:40:37 UTC
Encoder question
Dan Mauch
2006-03-08 17:40:31 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
BRIAN FOLEY
2006-03-08 22:00:27 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Peter Homann
2006-03-08 22:06:48 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
BRIAN FOLEY
2006-03-08 23:42:13 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question
Carl Mikkelsen
2006-03-10 14:12:50 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question - Rutex concerns
Jon Elson
2006-03-10 18:21:53 UTC
Re: [CAD_CAM_EDM_DRO] Encoder question - Rutex concerns
John Dammeyer
2006-03-10 19:40:43 UTC
MPG behaviour
craig strudwicke
2006-03-10 21:06:52 UTC
RE: [CAD_CAM_EDM_DRO] MPG behaviour
Steve Blackmore
2006-03-11 00:44:27 UTC
Re: [CAD_CAM_EDM_DRO] MPG behaviour
Andy Wander
2006-03-11 04:08:50 UTC
RE: [CAD_CAM_EDM_DRO] MPG behaviour
Alan Marconett
2006-03-11 09:06:05 UTC
Re: [CAD_CAM_EDM_DRO] MPG behaviour
bob_kellock
2006-03-11 09:47:45 UTC
Re: Encoder question - Rutex concerns
Peter Homann
2006-03-11 14:31:49 UTC
Re: [CAD_CAM_EDM_DRO] MPG behaviour
skykotech
2006-03-14 10:54:55 UTC
Re: Encoder question
BRIAN FOLEY
2006-03-14 13:45:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder question
Les Newell
2006-03-14 14:05:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder question
BRIAN FOLEY
2006-03-14 14:46:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder question
skykotech
2006-03-14 16:09:20 UTC
Re: Encoder question
BRIAN FOLEY
2006-03-14 16:12:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder question