Re: [CAD_CAM_EDM_DRO] Houston, we have...

Also, linux is case sensitive so
CD /usr/local/emc is different than
cd /usr/local/emc


Disclaimer: I only enough to get me and
possibly you in trouble. We may get to a
point where I will have to yield my help to
someone who knows more than me.

bill

> Greets Bill~!
> Thanks for the help.
> Comments below.
>
> From: "William Scalione" <wscalione@...>
>
> > First thing is, single click only. Double click is not
> > required. Kind of hard to get used to after using
> > Winders. Problem with clicking on the icons is
> > there is no messages shown so do the following
> > and report back with any messages
>
> Ohhhhhh...okay.
>
> > First click on the terminal window on the toolbar
> > at the bottom of the screen (looks like 2 computers)
>
> What is called "Terminal" on mine looks like a DOS window represented in

the

> icon.
>
> > This will bring up a terminal screen (like a dos window).
> > change to the emc directory. Note the direction of the
> > slashes. Obviously, don't enter the quotes
> >
> > "cd /usr/local/emc"
>
> did this and got "bash: cd/usr/local/emc : no such file or directory"
>
> > start emc with the following command
> >
> > "./emc.run" (look close - dot slash emc dot run)
>
> Same result.
>
> > report back with any messages shown
>
> Yessir.
> Also of note is that I have an icon on the desktop named "emc"
> representing a folder and having the little windows type shortcut arrow.
> Clicking it, I go to the directory you asked me for.
> (that's weird)
> Clicking the file named "emc.run" results in nothing.
>
> Any ideas?
>
> Thanks,
>
> Weyland
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>