Re: [CAD_CAM_EDM_DRO] Re: collets
Posted by
Sven Peter
on 2001-11-09 06:22:35 UTC
Hi Ian,
I have seen a lot of machines and a few big ones but nothing compared
with this. My tries always ran out of center without cylindrical
grinder. And even sometimes with it.
Have fun making collets.
Sven Peter
Iain Ward wrote:
I have seen a lot of machines and a few big ones but nothing compared
with this. My tries always ran out of center without cylindrical
grinder. And even sometimes with it.
Have fun making collets.
Sven Peter
Iain Ward wrote:
>
> I do not have to worry about drill wander over the 29" length of
> the collet.
> Damnedest thing I've seen, 20" draw bar on a 29" long collet. The
> spindle bore is trumpet shaped and has 16" of contact surface for
> compressing the collet.
>
> Sorry for the ramble, but hopefully it helps.
>
> Iain
>
Discussion Thread
LEW BEST
2001-11-07 19:13:17 UTC
collets
Rich D.
2001-11-07 20:37:20 UTC
Re: [CAD_CAM_EDM_DRO] collets
LEW BEST
2001-11-07 20:46:14 UTC
RE: [CAD_CAM_EDM_DRO] collets
Rich D.
2001-11-07 21:11:23 UTC
Re: [CAD_CAM_EDM_DRO] collets
LEW BEST
2001-11-07 21:14:03 UTC
RE: [CAD_CAM_EDM_DRO] collets
Marcus & Eva
2001-11-07 21:24:53 UTC
Re: [CAD_CAM_EDM_DRO] collets
dkowalcz@d...
2001-11-07 22:02:26 UTC
Re: collets
Christopher Coley
2001-11-08 08:00:20 UTC
MAXNC 10
Smoke
2001-11-08 09:34:56 UTC
Re: [CAD_CAM_EDM_DRO] collets
Alan Marconett KM6VV
2001-11-08 13:51:39 UTC
Re: [CAD_CAM_EDM_DRO] MAXNC 10
Christopher Coley
2001-11-08 13:53:39 UTC
RE: [CAD_CAM_EDM_DRO] MAXNC 10
Alan Marconett KM6VV
2001-11-08 15:10:04 UTC
Re: [CAD_CAM_EDM_DRO] MAXNC 10
dougrasmussen@c...
2001-11-08 19:06:26 UTC
Re: collets
LEW BEST
2001-11-08 19:27:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: collets
LEW BEST
2001-11-09 04:47:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: collets
Iain Ward
2001-11-09 05:20:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Sven Peter
2001-11-09 06:22:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
dougrasmussen@c...
2001-11-09 08:12:51 UTC
Re: collets
Sven Peter
2001-11-09 10:58:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Iain Ward
2001-11-09 17:46:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Marcus & Eva
2001-11-09 19:37:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
dougrasmussen@c...
2001-11-09 21:29:42 UTC
Re: collets
Marcus & Eva
2001-11-10 09:08:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
ccs@m...
2001-11-10 09:26:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Fred Smith
2001-11-10 10:11:34 UTC
Re: collets
dougrasmussen@c...
2001-11-10 17:00:12 UTC
Re: collets
Fred Smith
2001-11-10 17:13:44 UTC
Re: collets
ccs@m...
2001-11-10 17:16:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Marcus & Eva
2001-11-10 19:01:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Ian Wright
2001-11-13 15:48:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Marcus & Eva
2001-11-13 21:25:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Ian Wright
2001-11-14 02:38:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets
Smoke
2001-11-14 08:02:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: collets