Re: Camtronics
Posted by
wayne_j_hill@y...
on 2001-11-15 08:40:05 UTC
Kits I have built from Camtronics.
1 - 2 amp board (3 axis board)
1 - 5 amp board (3 axis board)
7 - 5 amp single axis boards.
I have built them for myself and friends. Take you time assembling
the components. The heat sink is not included in the kit. Here is
an example of the heat sink on my 5 amp board.
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Wayne%27s%
20World/Stepper.jpg
Dan is very helpful with questions.
Wayne
1 - 2 amp board (3 axis board)
1 - 5 amp board (3 axis board)
7 - 5 amp single axis boards.
I have built them for myself and friends. Take you time assembling
the components. The heat sink is not included in the kit. Here is
an example of the heat sink on my 5 amp board.
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Wayne%27s%
20World/Stepper.jpg
Dan is very helpful with questions.
Wayne
--- In CAD_CAM_EDM_DRO@y..., pkranger63@y... wrote:
> Well after some really helpful advice from this group I have
decided
> to give CNC a try. I am considring going the "roll your own" and
am
> consdiring going with camtronics stepper motor kit. I am a little
> apprehensive about assembling the unit. Is it difficult? I have
> some soldering experince from back in the R/C car racing days but
> that is the extent of my knowledge. Any alternatives I should look
> into? I have also looked into a Maxnc motion control kit but from
> what I have read so far the 70oz motors the kit comes with would
> probably be a bit on the weak side...still the price seems
right :)
> As always thanks for the help.
>
> Matt
Discussion Thread
info.host@b...
2001-07-23 16:52:38 UTC
Camtronics
pkranger63@y...
2001-11-14 18:33:03 UTC
Camtronics
Tim Goldstein
2001-11-14 18:41:41 UTC
RE: [CAD_CAM_EDM_DRO] Camtronics
Alan Marconett KM6VV
2001-11-14 18:42:55 UTC
Re: [CAD_CAM_EDM_DRO] Camtronics
Carol & Jerry Jankura
2001-11-14 20:31:21 UTC
RE: [CAD_CAM_EDM_DRO] Camtronics
Rich D.
2001-11-14 20:52:20 UTC
Re: [CAD_CAM_EDM_DRO] Camtronics
currinh@O...
2001-11-14 21:18:32 UTC
Re: Camtronics
Dan Statman
2001-11-14 22:46:27 UTC
Re: [CAD_CAM_EDM_DRO] Camtronics
alenz@c...
2001-11-14 23:59:23 UTC
Re: Camtronics
Carol & Jerry Jankura
2001-11-15 05:24:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Camtronics
Tim
2001-11-15 08:36:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: Camtronics
wayne_j_hill@y...
2001-11-15 08:40:05 UTC
Re: Camtronics
dlantz@a...
2001-11-15 08:41:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Camtronics
Tim
2001-11-15 08:57:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: Camtronics
currinh@O...
2001-11-15 11:40:45 UTC
Re: Camtronics
peter smith
2001-11-15 14:33:55 UTC
Re: [CAD_CAM_EDM_DRO] Camtronics
tauseef
2001-11-15 22:04:20 UTC
Re: Camtronics