CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Windoze - Linux

Posted by dlantz@a...
on 2001-11-27 06:26:50 UTC
sort-of, but it's risky! if you have a boot floppy (if you made one when
prompted during the linux install) AND you have empty partitions for windows
(or another disk you can use). what you will need to do is install windows
to empty partition somewhere, reboot (a million times) then reboot again...
and reboot a few more times just to be safe (it's microsoft after all)
sorry... anyhow reboot with the linux boot floppy in the drive, linux SHOULD
come up, then edit lilo.conf (should be in /etc) to include the windows os,
then rerun lilo (you should be root or superuser)
NOW if something goes wrong with this all, and windows doesn't want to
respond, you can boot with a windows 98 boot floppy and restore the WINDOWS
master boot sector with fdisk -mbs ... or something like that... may be
-mbr... can't remember (you will have to put fdisk ON your windows boot
floppy... i keep one around for just such an emergency. (never really know
when windows will go belly up)

ive personally found it easier to back up all the info to a burnable cd,
wipe the computer, install windows, then install linux over that (it will
autodetect windows) and proceed from there... ---Dave L.

-----Original Message-----
From: Ethan Vos [mailto:ethan@...]
Sent: Tuesday, November 27, 2001 6:17 AM
To: CAD_CAM_EDM_DRO (E-mail); EMC Mailing list (E-mail)
Subject: [CAD_CAM_EDM_DRO] Windoze - Linux


Is it possible to install Windoze 98 onto a computer that has EMC from the
BDI install?

If so how? I need the PC for Windoze and would rather not lose all my work
to date.

Ethan



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Ethan Vos 2001-11-27 06:18:21 UTC Windoze - Linux dlantz@a... 2001-11-27 06:26:50 UTC RE: [CAD_CAM_EDM_DRO] Windoze - Linux Bill Vance 2001-11-27 10:10:48 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Bert Pirson 2001-11-27 10:24:56 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Jon Elson 2001-11-27 10:45:01 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Alan Marconett KM6VV 2001-11-27 11:20:17 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Marcus & Eva 2001-11-27 18:56:11 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Steve Smith 2001-11-27 20:04:20 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Steve Smith 2001-11-27 20:06:45 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Bill Vance 2001-11-27 21:56:11 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux dlantz@a... 2001-11-28 05:09:38 UTC RE: [CAD_CAM_EDM_DRO] Windoze - Linux dlantz@a... 2001-11-28 05:15:29 UTC RE: [CAD_CAM_EDM_DRO] Windoze - Linux Ian Wright 2001-11-28 09:56:37 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Steve Smith 2001-11-28 20:23:20 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Jon Elson 2001-11-28 23:15:14 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux dlantz@a... 2001-11-29 05:09:48 UTC RE: [CAD_CAM_EDM_DRO] Windoze - Linux Jon Elson 2001-11-29 09:00:03 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux Steve Smith 2001-11-29 18:59:29 UTC Re: [CAD_CAM_EDM_DRO] Windoze - Linux dlantz@a... 2001-11-30 05:18:30 UTC RE: [CAD_CAM_EDM_DRO] Windoze - Linux