CAD CAM EDM DRO - Yahoo Group Archive

Re: Voltage recommendation for slosyn kml063f07

Posted by resosys
on 2001-12-09 14:47:20 UTC
--- In CAD_CAM_EDM_DRO@y..., Alan Marconett KM6VV <KM6VV@a...> wrote:
> Hi Chris,
>
> Bob C. has said he got his for $149, from www.electrosales.com, I
> think. I sent them mail requesting a quote, and a new catalog.
>
> I'd heard they had a Sac store, but haven't had a change to stop
in. I
> LEFT the two with damaged leads, even 'tho one had an nice coupler
on
> it.

Wow, we payed $22/piece for 14 of them. We cleaned out the Sac store
because we have several projects to complete and you can never have
enough motors. The Sacramento store gets most of their stock from
the Sunnyvale store so it's not worth the trip. My friend lives in
Sacramento so it worked out well for us. I found the motors in
Sunnyvale and asked him to check the other location.

> > Probably a little to big to put on a Sherline mill!

Certaily, can you say twisted table! We have a CNC lathe, good sized
bench mill, and two routers to complete. These motors should work
great, especially if we keep the voltage and amps at a moderate level
so they don't break anything.

Glad to hear it was a good deal.

I'll report any power supply findings as I have a nack for such
things. Last time I looked for power supplies, it was for a Tesla
coil and I ended up with 28 34KV@120ma laser supplies and the caps to
go with them....go figure.

Chris

Discussion Thread

resosys 2001-12-08 17:40:24 UTC Voltage recommendation for slosyn kml063f07 Bob Campbell 2001-12-08 18:02:32 UTC Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07 Alan Marconett KM6VV 2001-12-08 19:15:29 UTC Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07 resosys 2001-12-09 12:35:16 UTC Re: Voltage recommendation for slosyn kml063f07 Alan Marconett KM6VV 2001-12-09 14:29:39 UTC Re: Voltage recommendation for slosyn kml063f07 resosys 2001-12-09 14:47:20 UTC Re: Voltage recommendation for slosyn kml063f07 Alan Marconett KM6VV 2001-12-09 15:07:23 UTC Re: Voltage recommendation for slosyn kml063f07 resosys 2001-12-09 16:38:55 UTC Re: Voltage recommendation for slosyn kml063f07 Bill Vance 2001-12-09 16:48:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07 Matthew King 2001-12-09 17:15:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07 resosys 2001-12-09 17:32:46 UTC Re: Voltage recommendation for slosyn kml063f07 Bob Campbell 2001-12-09 17:42:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07 Alan Marconett KM6VV 2001-12-09 18:41:02 UTC Re: Voltage recommendation for slosyn kml063f07 Alan Marconett KM6VV 2001-12-09 18:45:03 UTC Re: Voltage recommendation for slosyn kml063f07 JanRwl@A... 2001-12-09 20:48:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07