Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07

Chris,

Download the white paper from www.geckodrive.com . It has most of the
information that you will need about power supplies and the capacitance
required.

Bob Campbell

----- Original Message -----
From: "resosys" <resosys@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, December 09, 2001 6:38 PM
Subject: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07


> > 14! I only got 4! But then, I only paid $15 ea. How about caps?
> > Right now, all I can come up with is 50V caps. Will need better to
> run
> > 70V using both transformers.
>
> That leads me to another question. What is the best arrangement for
> filtering the DC after the bridge rectifier? I have seen this done
> several ways and was wondering if there was a set method.
>
> Depending on which types of caps you are looking for, there are
> several sources. Microvave oven caps tend to be a favorite with the
> high voltage folks for power factor correction and the like. They
> could easily handle this type of working from a voltage standpoint.
>
> I'm not sure what the necessary values are for this type of
> application. If you want to make lightning, I can help out there.
>
> Chris
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>