Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07

ummmm....are you sure about that? My understanding was you could "increase"
voltage capacity by stringing caps together - only the capacitance.....

I'd *love* to hear otherwise, but I ain't tryin' it until I hear it from a
bunch of folks, Mariss most of all!

Thanks

Matt King

-----Original Message-----
From: Bill Vance <ccq@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Sunday, December 09, 2001 7:48 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn
kml063f07

>You could allways string two of these caps in series, or if you're

concerned

>about voltage doubling up at some point, three of them.....
>
>Bill
>
>On Sun Dec 9 15:05:40 2001, Alan Marconett KM6VV, <KM6VV@...> wrote:
>
>>Yeah Wow!
>>
>>14! I only got 4! But then, I only paid $15 ea. How about caps?
>>Right now, all I can come up with is 50V caps. Will need better to run
>>70V using both transformers.
>>
>>Alan KM6VV
>>
>>
>>resosys wrote:
>>>
>>> Wow, we payed $22/piece for 14 of them. We cleaned out the Sac store
>>> because we have several projects to complete and you can never have
>>> enough motors. The Sacramento store gets most of their stock from
>>> the Sunnyvale store so it's not worth the trip. My friend lives in
>>> Sacramento so it worked out well for us. I found the motors in
>>> Sunnyvale and asked him to check the other location.
>>>
>>> > > Probably a little to big to put on a Sherline mill!
>>>
>>> Certaily, can you say twisted table! We have a CNC lathe, good sized
>>> bench mill, and two routers to complete. These motors should work
>>> great, especially if we keep the voltage and amps at a moderate level
>>> so they don't break anything.
>>>
>>> Glad to hear it was a good deal.
>>>
>>> I'll report any power supply findings as I have a nack for such
>>> things. Last time I looked for power supplies, it was for a Tesla
>>> coil and I ended up with 28 34KV@120ma laser supplies and the caps to
>>> go with them....go figure.
>>>
>>> Chris
>
>--
>---------------------------------------------------------------------------

-

>RKBA! ***** Blessings On Thee, Oh Israel! *****

4-19!

>----------------+----------+--------------------------+--------------------

-

>An _EFFECTIVE_ | Insured | All matter is vibration. | Let he who hath no
>weapon in every | by COLT; | -- Max Plank | weapon sell his
>hand = Freedom | DIAL | In the beginning was the | garment and buy a
>on every side! | 1911-A1. | word. -- The Bible | sword.--Jesus

Christ

>----------------+----------+--------------------------+--------------------

-

>
> Constitutional Government is dead, LONG LIVE THE CONSTITUTION!!!!!
>
>---------------------------------------------------------------------------

-

>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>