Re: Voltage recommendation for slosyn kml063f07
Posted by
Alan Marconett KM6VV
on 2001-12-09 15:07:23 UTC
Yeah Wow!
14! I only got 4! But then, I only paid $15 ea. How about caps?
Right now, all I can come up with is 50V caps. Will need better to run
70V using both transformers.
Alan KM6VV
resosys wrote:
14! I only got 4! But then, I only paid $15 ea. How about caps?
Right now, all I can come up with is 50V caps. Will need better to run
70V using both transformers.
Alan KM6VV
resosys wrote:
>
> Wow, we payed $22/piece for 14 of them. We cleaned out the Sac store
> because we have several projects to complete and you can never have
> enough motors. The Sacramento store gets most of their stock from
> the Sunnyvale store so it's not worth the trip. My friend lives in
> Sacramento so it worked out well for us. I found the motors in
> Sunnyvale and asked him to check the other location.
>
> > > Probably a little to big to put on a Sherline mill!
>
> Certaily, can you say twisted table! We have a CNC lathe, good sized
> bench mill, and two routers to complete. These motors should work
> great, especially if we keep the voltage and amps at a moderate level
> so they don't break anything.
>
> Glad to hear it was a good deal.
>
> I'll report any power supply findings as I have a nack for such
> things. Last time I looked for power supplies, it was for a Tesla
> coil and I ended up with 28 34KV@120ma laser supplies and the caps to
> go with them....go figure.
>
> Chris
Discussion Thread
resosys
2001-12-08 17:40:24 UTC
Voltage recommendation for slosyn kml063f07
Bob Campbell
2001-12-08 18:02:32 UTC
Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-08 19:15:29 UTC
Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 12:35:16 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 14:29:39 UTC
Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 14:47:20 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 15:07:23 UTC
Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 16:38:55 UTC
Re: Voltage recommendation for slosyn kml063f07
Bill Vance
2001-12-09 16:48:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
Matthew King
2001-12-09 17:15:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 17:32:46 UTC
Re: Voltage recommendation for slosyn kml063f07
Bob Campbell
2001-12-09 17:42:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 18:41:02 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 18:45:03 UTC
Re: Voltage recommendation for slosyn kml063f07
JanRwl@A...
2001-12-09 20:48:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07