Re: Voltage recommendation for slosyn kml063f07
Posted by
resosys
on 2001-12-09 17:32:46 UTC
> ummmm....are you sure about that? My understanding was youcould "increase"
> voltage capacity by stringing caps together - only thecapacitance.....
>from a
> I'd *love* to hear otherwise, but I ain't tryin' it until I hear it
> bunch of folks, Mariss most of all!You can certainly series connect capacitors to increase the voltage
handling capability. This will change the total capacitance value.
In one of my other hobbies, we do this all the time. They have been
named MMCs which stands for Multi-mini capacitor. We string together
many capacitors (in my case 1600V .016mfd Panasonic Polypropolene
caps) to handle 10 to 50KV. In some cases, a resistor across each
capacitor is necessary to help drain them after runs and to help
balance the voltage across the array. Info here for the interested:
http://www.hot-streamer.com/TeslaCoils/MMCInfo/mmcinfo.htm
Chris
Discussion Thread
resosys
2001-12-08 17:40:24 UTC
Voltage recommendation for slosyn kml063f07
Bob Campbell
2001-12-08 18:02:32 UTC
Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-08 19:15:29 UTC
Re: [CAD_CAM_EDM_DRO] Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 12:35:16 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 14:29:39 UTC
Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 14:47:20 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 15:07:23 UTC
Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 16:38:55 UTC
Re: Voltage recommendation for slosyn kml063f07
Bill Vance
2001-12-09 16:48:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
Matthew King
2001-12-09 17:15:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
resosys
2001-12-09 17:32:46 UTC
Re: Voltage recommendation for slosyn kml063f07
Bob Campbell
2001-12-09 17:42:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 18:41:02 UTC
Re: Voltage recommendation for slosyn kml063f07
Alan Marconett KM6VV
2001-12-09 18:45:03 UTC
Re: Voltage recommendation for slosyn kml063f07
JanRwl@A...
2001-12-09 20:48:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07