CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] new members here:) {long}

Posted by Smoke
on 2001-12-21 10:02:43 UTC
Along the line of using the mill as Bill suggests, you could use a lathe to
wrap the springs around a threaded rod (like we do when making springs).
Then place the assembly along one of the table grooves and clamp at both
ends. With one cut on the mill you could make a lot of rings!

Smoke



> Yo Cyril;
>
> Do you have a mill?
>
> Wheather you do or don't, you could hot rap the rod around some steel
round
> stock, sort of like the line on a fishing reel, using a torch if you don't
have
> a forge to heat the rod. Then you can do it old style, by using a hot
chisel to
> cut the rings, or let it cool, clamp or even tack weld the ends to the rod
to
> the round stock, and if you have a mill, use a slitting saw to cut them
all in
> one pass. I'm not sure what the limit is, but slitting saws make a _very_
> narrow cut.
>
> Bill
>

Discussion Thread

turksfixit 2001-12-21 02:00:50 UTC new members here:) {long} ballendo 2001-12-21 04:17:12 UTC Re: new members here:) {long} turksfixit 2001-12-21 06:15:26 UTC Re: new members here:) {long} Bill Vance 2001-12-21 07:04:46 UTC Re: [CAD_CAM_EDM_DRO] new members here:) {long} Scott 2001-12-21 09:42:52 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long} Smoke 2001-12-21 09:58:04 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long} Smoke 2001-12-21 10:02:43 UTC Re: [CAD_CAM_EDM_DRO] new members here:) {long} turksfixit 2001-12-21 12:28:59 UTC Re: new members here:) {long} turksfixit 2001-12-21 12:31:28 UTC Re: new members here:) {long} ballendo 2001-12-22 00:30:14 UTC wire edm Chain mail was Re: new members here:) {long} ballendo 2001-12-22 01:30:05 UTC Re: new members here:) {long} Sven Peter 2001-12-22 05:23:07 UTC Re: [CAD_CAM_EDM_DRO] new members here:) {long} Sven Peter 2001-12-22 05:47:08 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long} Ian Wright 2001-12-22 08:21:09 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long} Ian Wright 2001-12-22 08:21:10 UTC Re: [CAD_CAM_EDM_DRO] new members here:) {long} Marcus & Eva 2001-12-22 08:42:23 UTC Re: [CAD_CAM_EDM_DRO] wire edm Chain mail was Re: new members here:) {long} turksfixit 2001-12-22 18:25:52 UTC Re: new members here:) {long} Ian Wright 2001-12-23 12:57:56 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long} Scott 2001-12-27 06:41:46 UTC Re: [CAD_CAM_EDM_DRO] Re: new members here:) {long}