CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question

Posted by Marcus & Eva
on 2002-01-16 08:32:37 UTC
Hi Tim:
Buy them individually from a reputable industrial supplier.
The "kits" are all garbage.
You'll need lots more small taps than large taps.
Sizes 4:40 to 10:32 you need at least 3 of each.
Anything between 1/4:20 and 5/16: 18 you need 2
Larger than that you need only 1
Guhring is a good brand
So is Yamawa and Clarkson.
Cheers

Marcus
----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 16, 2002 7:33 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question


> Yes many USA companies appear to make carbon steel taps. I am actually
> shopping for a tap and dies set to cover 4-40 through 1/2" and waht I
really
> want is USA made, HHS, and would like to keep it under $200. I am amazed
at
> the number of USA carbon steel sets I see. Anyone have any ideas on where
to
> get a HSS set? So far I have found an unknown brand USA at Enco for about
> $170 for a 39 piece set and McMaster lists one for about $180 but I
haven't
> check the country of origin (I would guess USA, but need to call and
> verify).
>
> Tim
> [Denver, CO]
>
> -----Original Message-----
> >
> >BTW, do any USA companies still make carbon steel taps?
> >
> >Doug
> >
> >
> >
> >
>
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> >Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> >Moderator: jmelson@... timg@... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

gm4t 2002-01-15 21:27:50 UTC General Tool Life Question Jon Elson 2002-01-15 22:13:44 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question Ian Wright 2002-01-16 01:47:18 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question yethdear0 2002-01-16 03:34:27 UTC Re: General Tool Life Question Sven Peter 2002-01-16 04:58:52 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question Mike Chaney 2002-01-16 05:09:27 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question doug98105 2002-01-16 07:12:50 UTC Re: General Tool Life Question Tim Goldstein 2002-01-16 07:35:11 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Deon Styger 2002-01-16 07:52:06 UTC RE: General Tool Life Question Marcus & Eva 2002-01-16 08:32:37 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question gm4t 2002-01-16 09:01:30 UTC Re: General Tool Life Question Smoke 2002-01-16 09:33:36 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question Ian Wright 2002-01-16 09:33:48 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Smoke 2002-01-16 09:45:06 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question gm4t 2002-01-16 09:57:09 UTC Re: General Tool Life Question Alan Marconett KM6VV 2002-01-16 10:27:00 UTC Re: [CAD_CAM_EDM_DRO] General Tool Life Question Jon Elson 2002-01-16 10:29:18 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Elson 2002-01-16 10:34:18 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Tim 2002-01-16 10:42:33 UTC RE: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Drew Rogge 2002-01-16 10:45:59 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Les Newell 2002-01-16 10:52:19 UTC Re: [CAD_CAM_EDM_DRO] RE: General Tool Life Question Alan Marconett KM6VV 2002-01-16 11:29:11 UTC Re: General Tool Life Question Hugh Currin 2002-01-16 12:16:09 UTC Re: General Tool Life Question Hugh Currin 2002-01-16 12:22:48 UTC Re: General Tool Life Question JanRwl@A... 2002-01-16 13:30:33 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Marcus 2002-01-16 14:53:51 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Hugh Currin 2002-01-16 15:05:46 UTC Re: General Tool Life Question Fitch R. Williams 2002-01-16 15:19:36 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Smoke 2002-01-16 15:26:07 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Gail & Bryan Harries 2002-01-16 15:55:59 UTC RE: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Marcus 2002-01-16 16:11:44 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Hugh Currin 2002-01-16 16:25:22 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Marcus & Eva 2002-01-16 18:42:04 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Marcus & Eva 2002-01-16 18:52:25 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Elson 2002-01-16 23:00:27 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Elson 2002-01-16 23:05:16 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Elson 2002-01-16 23:11:22 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Bill Vance 2002-01-16 23:19:03 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question ballendo 2002-01-17 02:59:55 UTC spiral FLUTE taps was Re: General Tool Life Question Sven Peter 2002-01-17 06:28:30 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Sven Peter 2002-01-17 06:28:54 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Fitch R. Williams 2002-01-17 06:44:45 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Anderson 2002-01-17 07:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Fitch R. Williams 2002-01-17 09:35:34 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Jon Elson 2002-01-17 10:54:29 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Fitch R. Williams 2002-01-17 11:02:02 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question ballendo 2002-01-17 18:30:18 UTC cnc tapping Re: General Tool Life Question Fitch R. Williams 2002-01-17 19:04:04 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question Raymond Heckert 2002-01-17 21:17:27 UTC Re: [CAD_CAM_EDM_DRO] Re: General Tool Life Question Ian Wright 2002-01-18 01:58:59 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question Smoke 2002-01-18 08:14:01 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question doug98105 2002-01-18 08:34:26 UTC cnc tapping Re: General Tool Life Question Smoke 2002-01-18 08:40:12 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question imserv1 2002-01-18 11:08:19 UTC cnc tapping Re: General Tool Life Question stevenson_engineers 2002-01-18 13:28:07 UTC cnc tapping Re: General Tool Life Question wanliker@a... 2002-01-18 13:33:40 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question netcom 2002-01-18 13:39:10 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question stevenson_engineers 2002-01-18 13:40:27 UTC cnc tapping Re: General Tool Life Question wanliker@a... 2002-01-18 14:15:50 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question wanliker@a... 2002-01-18 14:23:58 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question wanliker@a... 2002-01-18 14:24:43 UTC Re: [CAD_CAM_EDM_DRO] cnc tapping Re: General Tool Life Question stevenson_engineers 2002-01-18 14:38:41 UTC cnc tapping Re: General Tool Life Question stevenson_engineers 2002-01-18 15:08:44 UTC cnc tapping Re: General Tool Life Question ballendo 2002-01-19 04:25:02 UTC cnc tapping stevenson_engineers 2002-01-19 11:58:06 UTC Re: cnc tapping & probably the last post. Raymond Heckert 2002-01-20 13:26:08 UTC Re: [CAD_CAM_EDM_DRO] Re: cnc tapping & probably the last post. Hugh Currin 2002-01-25 19:16:29 UTC VMware and Vector 9.3 Fitch R. Williams 2002-01-26 08:17:45 UTC Re: [CAD_CAM_EDM_DRO] VMware and Vector 9.3 Hugh Currin 2002-01-26 09:19:30 UTC Re: VMware and Vector 9.3 Gene 2002-02-09 09:53:24 UTC Re: [CAD_CAM_EDM_DRO] VMware and Vector 9.3 imserv1 2002-02-09 15:47:57 UTC Re: VMware and Vector 9.3 Bill Vance 2002-02-09 16:34:47 UTC Re: [CAD_CAM_EDM_DRO] Re: VMware and Vector 9.3 Hugh Currin 2002-02-09 16:57:07 UTC Re: VMware and Vector 9.3 imserv1 2002-02-09 17:44:41 UTC Re: VMware and Vector 9.3 imserv1 2002-02-09 18:03:53 UTC Re: VMware and Vector 9.3 Paul 2002-02-09 18:18:56 UTC Re: [CAD_CAM_EDM_DRO] Re: VMware and Vector 9.3 Bill Vance 2002-02-09 20:25:44 UTC Re: [CAD_CAM_EDM_DRO] Re: VMware and Vector 9.3