Re: [CAD_CAM_EDM_DRO] Re: Indexer LPT

"Nock-off" NO !

That answers that. I have seen it run at trade shows. Not bad. Only issue i
had was it seems you must import G-code rather than just run it. That is the
problem.

His machine designs have been very good too.

Chris L

ballendo wrote:

> Hello,
>
> Larkens motion and CVV is EXCELLENT. And NO, it is NOT a knockoff! It
> is the multi-year work in progress of one man; Larry Kenny. (although
> it stabilised some time ago and he has put more time into corollary
> programs to create toolpaths to "feed" it.)
>
> Biggest down side really isn't for tose who, as you say, jusr Draw,
> and cut parts" is that everything must be run through the CAD part to
> convert to the "native" unseen code. Import SEEMS widel ranging, but
> the gcode import is only G0,G1,G2,G3. Pretty sparse.
>
> But for those looking for something that just plain WORKS (especially
> for wood and sign and plastic fab stuff), IMO, it is hard to beat.
> Again, this is not a 100 buck solution; but fairly priced.
>
> Hope this helps.
>
> Ballendo
>
> --- In CAD_CAM_EDM_DRO@y..., Chris L <datac@l...> wrote:
> <snip>
> >I am told that Larkens (dos) motion is very close to indexer - is IT
> >a knock off ? )
> <snip>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/