Re: [CAD_CAM_EDM_DRO] Re: loosing steps

New motor = 4.5 amp 2 volts, 1.8' step, 40 volt supply. Old motor = 1.4
amp 4.5 volts 2.0" step 70 volt supply.

mariss92705 wrote:

>
> Gene,
>
> Your new motor probably has a higher inductance than your old motor.
> What are the rated phase currents of the new and old motors?
>
> Mariss
>
> --- In CAD_CAM_EDM_DRO@y..., Gene <capper@i...> wrote:
> > I replaced the 150 oZ steppers with 305 oz steppers and now cant
> seem to
> > go as fast as before without loosing steps. What is the most common
> > cause for loosing steps?
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/