Re: [CAD_CAM_EDM_DRO] Re: loosing steps

>
> Gene wrote:
>
> > If I turn it up much it will go over the 20-25 voltage ratio
>
> So, it is more important to satisfy a nebulous ratio handed down
> from who knows where, than to have a system that performs to
> your needs.
>
> Do you know what will happen if you exceed this ratio? probably,
> nothing. At worst, the motors will run a little warmer. Check
> with Mariss if you are using Gecko drives, but I suspect that if the
> driver is rated for higher voltage, there will be no harm in testing
> that way. If the motors get too warm for your liking, you can
> look into other motors and other solutions. But really, the
> fundamental differences between running a 2 V winding motor
> at 40 V and 70 V should not be very significant. The 70 V
> power supply should allow you to go nearly twice as fast before
> losing steps.
>
> Are these 4 , 6 or 8 wire motors?
>
> Jon
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/