Re: [CAD_CAM_EDM_DRO] small 3-axis micro stepper

As far as I can tell from his pictures the CMD-260 drives he is selling are
the very old model that is only 5 amps. The new ones that I sold out of were
the 8 amp model and comparing his pictures to my drives the making seem to
be indicating the lower amp older version. Also this guy is not including
the wire side of the modular connectors. It is VERY difficult to connect
without them so you do have to try and dig them up. I was contacted by a
number of the people that purchased the used drives to see if I had
connectors (I didn't have any extra).

The API drives are very nice units, but are a pig in a poke from this
vendor.

BTW, the NEMA 23 PowerMax II 214 in/oz motors I am selling would be a very
good match in series configuration for the http://www.xylotex.com/ driver.

Tim
[Denver, CO]
www.KTMarketing.com/CNC.html

> You can do a search on ebay for "API CMD-260" and you will
> usually come up with a few. Some guy sells them by the ton. They
> usually go for about $60.00 each, used. They are untested and you
> get what you get, but will handle up to 80V, will microstep, and do
> up to 8 amps I think. You can do a search on completed items and ask
> the people who already bought some if they worked ok for them.
>
> Bill