CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1

Posted by aussiedude
on 2002-11-29 19:25:17 UTC
Well that much I think I know, feel free to correct me though.
The "board" is a pic based producet that takes RS232 commands from a
serial port and generates step / direction outputs as opposed to using a
printer port.
I believe it makes for "better" more accurate pulses with better mixing
of X and Y axis especially when doing circles etc. ?? I think it gives
a theoretical higher number of steps per second. I wonder how "real
time" it is though. However Mach 1 doesn’t seem to need it.
Any comments ?




-----Original Message-----
From: Carol & Jerry Jankura [mailto:jerry.jankura@...]
Sent: Friday, November 29, 2002 6:49 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] DeskCNC now in beta release


I'll ask another question -

What does the controller board do? How does it compare to Mariss'
forthcoming G2002 project? Might it be used with a different G-Code
interpreter?

-- Jerry


|I have noticed a lot of people on this list are also on Art's Master5
|/ mach 1 list also. OK, so what would be the advantages of using
|DeskCNC with controller board over master 5 with a printer port ?
|Especially in the way of software ie what is different / better for one

|over the other.



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

Fred Smith 2002-11-29 14:53:44 UTC DeskCNC now in beta release Tim Goldstein 2002-11-29 17:32:30 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC now in beta release aussiedude 2002-11-29 18:45:01 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC now in beta release Carol & Jerry Jankura 2002-11-29 18:48:11 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC now in beta release aussiedude 2002-11-29 19:25:17 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 aussiedude 2002-11-29 19:31:19 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 Tim Goldstein 2002-11-29 19:31:55 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC now in beta release Tim Goldstein 2002-11-29 19:39:59 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 Tim Goldstein 2002-11-29 19:44:02 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 aussiedude 2002-11-29 19:51:43 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 Tim Goldstein 2002-11-29 20:06:16 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 aussiedude 2002-11-29 20:18:21 UTC RE: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 Chris L 2002-11-29 20:27:45 UTC Re: [CAD_CAM_EDM_DRO] DeskCNC Versus Master 5 / Mach 1 stevenson_engineers 2002-11-30 01:22:18 UTC Re: DeskCNC Versus Master 5 / Mach 1 Jens Swales 2002-11-30 02:58:15 UTC Re: DeskCNC Versus Master 5 / Mach 1 Chris L 2002-11-30 07:03:05 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskCNC Versus Master 5 / Mach 1 Fred Smith 2002-12-06 08:57:36 UTC Re: DeskCNC now in beta release stevenson_engineers 2002-12-06 10:43:08 UTC Re: DeskCNC now in beta release Bob Simon 2002-12-06 11:08:53 UTC BDI and servos Tim Goldstein 2002-12-06 13:29:50 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskCNC now in beta release Jon Elson 2002-12-06 22:02:18 UTC Re: [CAD_CAM_EDM_DRO] BDI and servos Ray Henry 2002-12-07 07:16:47 UTC Re: BDI and servos Bob Simon 2002-12-07 08:39:19 UTC Re: [CAD_CAM_EDM_DRO] BDI and servos blown_mgb_v8 <jblackwood5@i... 2002-12-07 08:51:32 UTC Re: BDI and servos Bob Simon 2002-12-07 08:58:13 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI and servos Ray Henry 2002-12-07 17:02:43 UTC Re: Re: BDI and servos Ray Henry 2002-12-07 17:45:06 UTC Re: Re: BDI and servos Ray Henry 2002-12-07 17:45:09 UTC Re: Re: Re: BDI and servos Jon Elson 2002-12-07 22:10:25 UTC Re: [CAD_CAM_EDM_DRO] BDI and servos Jon Elson 2002-12-07 22:11:46 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI and servos Bob Simon 2002-12-08 11:48:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI and servos Bob Simon 2002-12-08 11:48:06 UTC Re: [CAD_CAM_EDM_DRO] BDI and servos Jon Elson 2002-12-08 23:09:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI and servos Jon Elson 2002-12-08 23:12:29 UTC Re: [CAD_CAM_EDM_DRO] BDI and servos Ray Henry 2002-12-09 05:03:02 UTC Re: Re: Re: Re: BDI and servos Bob Simon 2002-12-11 09:40:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: BDI and servos