CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Software

Posted by hllrsr@c...
on 2003-03-03 18:22:56 UTC
Dave,
From what I was told this afternoon, he bought a surplused
"multipurpose" robot with two different welding heads and a vacuum
gripper.
The sort of thing that is good at some things but great at none.
What he is hoping to do, is rework it to a programmable drilling
machine, using the existing hydraulic drive system.
The PLC was an Allen Bradley SLC500 switching valves on and off to
control the hydraulics.
Using a replacement PLC would probably be the easiest and sane way to
run this, but he would prefer to use one of the 10 computer systems he
has on hand, using the same style of ladder programming as a PLC .

I do not know if what he wants to do is even feasible, at least in an
economical sense, but it's definitely going to be a challenge.

Iain


"turbulatordude " wrote:
>
> A PLC is not off topic if it is related to the major topics. What
> type of machine ? often times lathes and mills are run with PLC's
> and then we switch them over to PC control.
>
> if he is using lots of I/O's then he need to find out how they are
> contorlled. sometimes they are serial, (Modicon ?) or hopefully just
> digital.
>
> A cheap source of PLC's is www.automatondirect.com They also have
> switches, variable speed drives, enclosures and lights that we all
> can use.
>
> Dave
>

Discussion Thread

zoomer@n... 2001-10-24 22:15:39 UTC Software Ron Kline 2001-12-04 17:31:22 UTC Software glee@i... 2001-12-04 17:43:00 UTC Re: [CAD_CAM_EDM_DRO] Software Alan Marconett KM6VV 2001-12-04 21:43:28 UTC Re: [CAD_CAM_EDM_DRO] Software glee@i... 2001-12-04 21:52:48 UTC Re: [CAD_CAM_EDM_DRO] Software Tim Goldstein 2001-12-04 22:08:23 UTC RE: [CAD_CAM_EDM_DRO] Software glee@i... 2001-12-04 22:16:40 UTC RE: [CAD_CAM_EDM_DRO] Software Brian Pitt 2001-12-04 22:41:38 UTC Re: [CAD_CAM_EDM_DRO] Software cncguroo 2001-12-04 23:28:51 UTC Re: Software stevenson_engineers 2001-12-05 00:20:05 UTC Re: Software stevenson_engineers 2001-12-05 00:25:09 UTC Re: Software Tony Jeffree 2001-12-05 00:36:09 UTC Re: Software wanliker@a... 2001-12-05 01:30:53 UTC Re: [CAD_CAM_EDM_DRO] Software stevenson_engineers 2001-12-05 03:55:36 UTC Re: Software David Goodfellow 2001-12-05 08:43:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Software Michael Milligan 2001-12-05 09:08:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Software Gail & Bryan Harries 2001-12-05 09:09:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Software Alex Canale 2001-12-05 09:29:58 UTC RE: [CAD_CAM_EDM_DRO] Re: Software doug98105 2001-12-05 10:40:58 UTC Dolphin pricing, was Re: Software Drew Rogge 2001-12-05 10:49:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Software Alan Marconett KM6VV 2001-12-05 10:51:18 UTC Re: [CAD_CAM_EDM_DRO] Software Tim 2001-12-05 10:52:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Software Alan Marconett KM6VV 2001-12-05 11:04:49 UTC Re: Software IMService 2001-12-05 11:31:34 UTC Re: Re: Software imserv1 2001-12-05 11:40:08 UTC Re: Software Michael Milligan 2001-12-05 11:42:49 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software glee@i... 2001-12-05 11:54:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Software currinh@O... 2001-12-05 11:59:11 UTC Re: Dolphin's Web Site John Barnwell 2001-12-05 12:16:05 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software stevenson_engineers 2001-12-05 12:26:24 UTC Re: Software Craig Chamberlin 2001-12-05 12:29:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site dlantz@a... 2001-12-05 12:31:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site Alan Marconett KM6VV 2001-12-05 13:12:05 UTC Re: Dolphin's Web Site verizon 2001-12-05 13:32:08 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software glee@i... 2001-12-05 13:52:23 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software follicely_challenged 2001-12-05 13:56:33 UTC Dolphin pricing, was Re: Software currinh@O... 2001-12-05 14:10:34 UTC Re: Dolphin's Web Site Michael Milligan 2001-12-05 14:23:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site Smoke 2001-12-05 15:37:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site Smoke 2001-12-05 15:45:51 UTC Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software David Goodfellow 2001-12-05 15:55:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site imserv1 2001-12-05 20:28:37 UTC Re: Software Craig Chamberlin 2001-12-06 00:51:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site stevenson_engineers 2001-12-06 01:05:02 UTC Re: Software dlantz@a... 2001-12-06 04:57:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site dlantz@a... 2001-12-06 05:33:50 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software dlantz@a... 2001-12-06 05:36:11 UTC RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site Ray 2001-12-06 08:15:16 UTC Re: Re: Dolphin's Web Site currinh@O... 2001-12-06 14:48:24 UTC Re: Dolphin's Web Site Fitch R. Williams 2002-02-09 17:58:42 UTC Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software Fitch R. Williams 2002-02-09 18:03:14 UTC Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software Monte Westlund 2002-02-09 18:06:33 UTC Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software Chris Clough 2002-02-09 19:12:41 UTC RE: [CAD_CAM_EDM_DRO] Full Version for sale Was: Dolphin pricing Michael Milligan 2002-02-09 21:30:16 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software Michael Milligan 2002-02-09 21:30:17 UTC RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software cdmckeown <cmckeown@i... 2002-12-28 15:38:14 UTC Software dholness@a... 2002-12-29 16:27:20 UTC Re: [CAD_CAM_EDM_DRO] Software hllrsr@c... 2003-03-03 15:59:58 UTC Software JanRwl@A... 2003-03-03 17:27:55 UTC Re: [CAD_CAM_EDM_DRO] Software turbulatordude <davemucha@j... 2003-03-03 17:58:42 UTC Re: Software hllrsr@c... 2003-03-03 18:22:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Software hllrsr@c... 2003-03-03 18:26:17 UTC Re: [CAD_CAM_EDM_DRO] Software Paul 2003-03-04 10:04:59 UTC Re: [CAD_CAM_EDM_DRO] Software Dave Fisher 2003-11-15 02:19:27 UTC Re: Software stevenson_engineers 2003-11-15 03:52:13 UTC Re: Software Fred Smith 2003-11-15 03:55:41 UTC Re: Software stevenson_engineers 2003-11-15 05:01:13 UTC Re: Software Dave Fisher 2003-11-15 12:07:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Software Fred Smith 2003-11-16 05:37:57 UTC Re: Software Mark Thomas 2004-01-29 09:46:49 UTC RE: [CAD_CAM_EDM_DRO] Re: Software Art 2004-01-29 12:55:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Software Mark Thomas 2004-01-30 06:02:34 UTC RE: [CAD_CAM_EDM_DRO] Re: Software pug_harley_corvette 2005-06-15 13:18:14 UTC Software Robert Campbell 2005-06-15 13:25:13 UTC Re: [CAD_CAM_EDM_DRO] Software Art Eckstein 2005-06-15 14:31:00 UTC Re: [CAD_CAM_EDM_DRO] Software Fred Smith 2005-06-15 15:32:24 UTC Re: Software Andrey Lipavsky 2005-06-15 17:04:33 UTC RE: [CAD_CAM_EDM_DRO] Software Art Eckstein 2005-06-15 17:54:22 UTC RE: [CAD_CAM_EDM_DRO] Software Andrey Lipavsky 2005-06-15 18:46:13 UTC RE: [CAD_CAM_EDM_DRO] Software turbulatordude 2005-06-15 19:00:51 UTC Re: ( was Software ) now Servo Wars Polaraligned 2005-06-16 03:36:10 UTC Re: ( was Software ) now Servo Wars pug_harley_corvette 2005-06-16 06:28:10 UTC Re: Software turbulatordude 2005-06-16 07:56:59 UTC Re: ( was Software ) now Servo Wars Fred Smith 2005-06-16 07:57:45 UTC Re: ( was Software ) now Servo Wars Mike 2005-06-16 07:58:35 UTC Re: Software Polaraligned 2005-06-16 08:48:05 UTC Re: ( was Software ) now Servo Wars Jon Elson 2005-06-16 09:56:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Motor Specs Jon Elson 2005-06-16 10:00:45 UTC Re: [CAD_CAM_EDM_DRO] Re: ( was Software ) now Servo Wars pug_harley_corvette 2005-06-16 10:29:37 UTC Re: Software pug_harley_corvette 2005-06-16 10:40:18 UTC Re: Motor Specs Fred Smith 2005-06-16 10:52:16 UTC Re: ( was Software ) now Servo Wars JCullins 2005-06-16 15:48:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Software Mike 2005-06-16 20:36:14 UTC Re: Software Jack 2005-06-16 22:23:21 UTC Re: Software pug_harley_corvette 2005-06-20 06:52:48 UTC Re: Software