Re: [CAD_CAM_EDM_DRO] Re: Software
Posted by
Dave Fisher
on 2003-11-15 12:07:09 UTC
Thanks for the reply - I have now looked at DeskCNC and it looks good
for my needs. I am new to the CNC world (hence my questions !)
Do I assume correctly that with DeskCNC I would not need the Artsoft Mach2 product ?
I read it, that with the hardware board I can connect direct to my Rutex servo amps ?
Rgds
Dave Fisher
for my needs. I am new to the CNC world (hence my questions !)
Do I assume correctly that with DeskCNC I would not need the Artsoft Mach2 product ?
I read it, that with the hardware board I can connect direct to my Rutex servo amps ?
Rgds
Dave Fisher
----- Original Message -----
From: "Fred Smith" <imserv@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 15, 2003 11:55 AM
Subject: [CAD_CAM_EDM_DRO] Re: Software
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dave Fisher" <dave@d...>
> wrote:
> >I have looked at just sending DXF files
> > from a CAD program into Mach2, but there seems a lot more
> parameters have to set
> > before a cut can be made !
>
> These parameters are a program called CAM. This program stands
> between the Cad design function and the controller. Cad-Cam-Controller
>
> DeskCNC has integrated Cam and Controller within a single software
> program.
>
>
> Click the machining button, the program is saved and is ready to run
> in machining mode.
>
> DeskCNC costs $350 and includes an external controller board that
> mounts in your driver enclosure and connects to the serial port. The
> board has screw terminals to connect the step and direction lines on
> your drivers, and spindle/coolant relay control lines, spindle
> direction and speed, limit and home switches, e-stop, feed-hold, and
> probe/tool setter. It runs on most any 32 bit Windows computer.
>
> Best Regards, Fred Smith- IMService
>
> Listserve Special discounts and offers are at:
> http://www.imsrv.com/hobby
>
> We are THE source for low cost Cad Cam
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
[Non-text portions of this message have been removed]
Discussion Thread
zoomer@n...
2001-10-24 22:15:39 UTC
Software
Ron Kline
2001-12-04 17:31:22 UTC
Software
glee@i...
2001-12-04 17:43:00 UTC
Re: [CAD_CAM_EDM_DRO] Software
Alan Marconett KM6VV
2001-12-04 21:43:28 UTC
Re: [CAD_CAM_EDM_DRO] Software
glee@i...
2001-12-04 21:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Software
Tim Goldstein
2001-12-04 22:08:23 UTC
RE: [CAD_CAM_EDM_DRO] Software
glee@i...
2001-12-04 22:16:40 UTC
RE: [CAD_CAM_EDM_DRO] Software
Brian Pitt
2001-12-04 22:41:38 UTC
Re: [CAD_CAM_EDM_DRO] Software
cncguroo
2001-12-04 23:28:51 UTC
Re: Software
stevenson_engineers
2001-12-05 00:20:05 UTC
Re: Software
stevenson_engineers
2001-12-05 00:25:09 UTC
Re: Software
Tony Jeffree
2001-12-05 00:36:09 UTC
Re: Software
wanliker@a...
2001-12-05 01:30:53 UTC
Re: [CAD_CAM_EDM_DRO] Software
stevenson_engineers
2001-12-05 03:55:36 UTC
Re: Software
David Goodfellow
2001-12-05 08:43:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
Michael Milligan
2001-12-05 09:08:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
Gail & Bryan Harries
2001-12-05 09:09:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
Alex Canale
2001-12-05 09:29:58 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
doug98105
2001-12-05 10:40:58 UTC
Dolphin pricing, was Re: Software
Drew Rogge
2001-12-05 10:49:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
Alan Marconett KM6VV
2001-12-05 10:51:18 UTC
Re: [CAD_CAM_EDM_DRO] Software
Tim
2001-12-05 10:52:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
Alan Marconett KM6VV
2001-12-05 11:04:49 UTC
Re: Software
IMService
2001-12-05 11:31:34 UTC
Re: Re: Software
imserv1
2001-12-05 11:40:08 UTC
Re: Software
Michael Milligan
2001-12-05 11:42:49 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
glee@i...
2001-12-05 11:54:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
currinh@O...
2001-12-05 11:59:11 UTC
Re: Dolphin's Web Site
John Barnwell
2001-12-05 12:16:05 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
stevenson_engineers
2001-12-05 12:26:24 UTC
Re: Software
Craig Chamberlin
2001-12-05 12:29:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
dlantz@a...
2001-12-05 12:31:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
Alan Marconett KM6VV
2001-12-05 13:12:05 UTC
Re: Dolphin's Web Site
verizon
2001-12-05 13:32:08 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
glee@i...
2001-12-05 13:52:23 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
follicely_challenged
2001-12-05 13:56:33 UTC
Dolphin pricing, was Re: Software
currinh@O...
2001-12-05 14:10:34 UTC
Re: Dolphin's Web Site
Michael Milligan
2001-12-05 14:23:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
Smoke
2001-12-05 15:37:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
Smoke
2001-12-05 15:45:51 UTC
Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
David Goodfellow
2001-12-05 15:55:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
imserv1
2001-12-05 20:28:37 UTC
Re: Software
Craig Chamberlin
2001-12-06 00:51:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
stevenson_engineers
2001-12-06 01:05:02 UTC
Re: Software
dlantz@a...
2001-12-06 04:57:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
dlantz@a...
2001-12-06 05:33:50 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
dlantz@a...
2001-12-06 05:36:11 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dolphin's Web Site
Ray
2001-12-06 08:15:16 UTC
Re: Re: Dolphin's Web Site
currinh@O...
2001-12-06 14:48:24 UTC
Re: Dolphin's Web Site
Fitch R. Williams
2002-02-09 17:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
Fitch R. Williams
2002-02-09 18:03:14 UTC
Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
Monte Westlund
2002-02-09 18:06:33 UTC
Re: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
Chris Clough
2002-02-09 19:12:41 UTC
RE: [CAD_CAM_EDM_DRO] Full Version for sale Was: Dolphin pricing
Michael Milligan
2002-02-09 21:30:16 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
Michael Milligan
2002-02-09 21:30:17 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin pricing, was Re: Software
cdmckeown <cmckeown@i...
2002-12-28 15:38:14 UTC
Software
dholness@a...
2002-12-29 16:27:20 UTC
Re: [CAD_CAM_EDM_DRO] Software
hllrsr@c...
2003-03-03 15:59:58 UTC
Software
JanRwl@A...
2003-03-03 17:27:55 UTC
Re: [CAD_CAM_EDM_DRO] Software
turbulatordude <davemucha@j...
2003-03-03 17:58:42 UTC
Re: Software
hllrsr@c...
2003-03-03 18:22:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
hllrsr@c...
2003-03-03 18:26:17 UTC
Re: [CAD_CAM_EDM_DRO] Software
Paul
2003-03-04 10:04:59 UTC
Re: [CAD_CAM_EDM_DRO] Software
Dave Fisher
2003-11-15 02:19:27 UTC
Re: Software
stevenson_engineers
2003-11-15 03:52:13 UTC
Re: Software
Fred Smith
2003-11-15 03:55:41 UTC
Re: Software
stevenson_engineers
2003-11-15 05:01:13 UTC
Re: Software
Dave Fisher
2003-11-15 12:07:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
Fred Smith
2003-11-16 05:37:57 UTC
Re: Software
Mark Thomas
2004-01-29 09:46:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
Art
2004-01-29 12:55:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
Mark Thomas
2004-01-30 06:02:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software
pug_harley_corvette
2005-06-15 13:18:14 UTC
Software
Robert Campbell
2005-06-15 13:25:13 UTC
Re: [CAD_CAM_EDM_DRO] Software
Art Eckstein
2005-06-15 14:31:00 UTC
Re: [CAD_CAM_EDM_DRO] Software
Fred Smith
2005-06-15 15:32:24 UTC
Re: Software
Andrey Lipavsky
2005-06-15 17:04:33 UTC
RE: [CAD_CAM_EDM_DRO] Software
Art Eckstein
2005-06-15 17:54:22 UTC
RE: [CAD_CAM_EDM_DRO] Software
Andrey Lipavsky
2005-06-15 18:46:13 UTC
RE: [CAD_CAM_EDM_DRO] Software
turbulatordude
2005-06-15 19:00:51 UTC
Re: ( was Software ) now Servo Wars
Polaraligned
2005-06-16 03:36:10 UTC
Re: ( was Software ) now Servo Wars
pug_harley_corvette
2005-06-16 06:28:10 UTC
Re: Software
turbulatordude
2005-06-16 07:56:59 UTC
Re: ( was Software ) now Servo Wars
Fred Smith
2005-06-16 07:57:45 UTC
Re: ( was Software ) now Servo Wars
Mike
2005-06-16 07:58:35 UTC
Re: Software
Polaraligned
2005-06-16 08:48:05 UTC
Re: ( was Software ) now Servo Wars
Jon Elson
2005-06-16 09:56:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motor Specs
Jon Elson
2005-06-16 10:00:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: ( was Software ) now Servo Wars
pug_harley_corvette
2005-06-16 10:29:37 UTC
Re: Software
pug_harley_corvette
2005-06-16 10:40:18 UTC
Re: Motor Specs
Fred Smith
2005-06-16 10:52:16 UTC
Re: ( was Software ) now Servo Wars
JCullins
2005-06-16 15:48:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software
Mike
2005-06-16 20:36:14 UTC
Re: Software
Jack
2005-06-16 22:23:21 UTC
Re: Software
pug_harley_corvette
2005-06-20 06:52:48 UTC
Re: Software