CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] LOOKING for homeshop EDM or its power supply?

on 2003-07-14 08:30:19 UTC
Hi Luis:
I just went out and bought one!!!
I looked at the plans from Robert Langlois in Home Shop Machinist ( I still
have the compiled articles) and I decided that it would be cheaper to buy an
E-Bay special.
I was right, I think.
They are available for less than a CNC'ed Sherline.
Everyone is dumping their manual machines and going with CNC versions (those
who are still in business, given the way our manufacturing economy is being
gutted) so a manual machine can be picked up for incredibly low prices.
I've seen ones go for under $1000.00.
I can't buy the materials to make one for that!!!
A good one for the HSM is the Hansvedt 150 B; it's a nice little benchtop
machine with a very nice control for its time.
It is capable of good fine burns with copper electrodes (Trust me....you
don't want to get into machining graphite electrodes in an HSM environment).
Just be aware that EDM is expensive to run, and stinky.
Hydraulic machines are also quite noisy.
Cheers

Marcus

----- Original Message -----
From: "luisguillermo98" <luisguillermo98@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, July 14, 2003 7:08 AM
Subject: [CAD_CAM_EDM_DRO] LOOKING for homeshop EDM or its power supply?


> Has anyone know where to find EDM machines for the hobbist?. What is
> the difference between the power supply that comes with EDM machines
> and the normal power supply we know?. Is there any website in how to
> build one of this machines?
>
>
> Luis...
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

luisguillermo98 2003-07-14 07:08:28 UTC LOOKING for homeshop EDM or its power supply? Marcus and Eva 2003-07-14 08:30:19 UTC Re: [CAD_CAM_EDM_DRO] LOOKING for homeshop EDM or its power supply? luisguillermo98 2003-07-15 20:01:55 UTC Re: LOOKING for homeshop EDM or its power supply? Marcus and Eva 2003-07-15 21:02:26 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? turbulatordude 2003-07-15 21:13:25 UTC Re: LOOKING for homeshop EDM or its power supply? luisguillermo98 2003-07-16 12:26:42 UTC Re: LOOKING for homeshop EDM or its power supply? luisguillermo98 2003-07-16 18:16:16 UTC Re: LOOKING for homeshop EDM or its power supply? Jerry Kimberlin 2003-07-16 18:34:02 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? Marcus and Eva 2003-07-16 18:48:22 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? turbulatordude 2003-07-16 19:06:35 UTC Re: LOOKING for homeshop EDM or its power supply? Marcus and Eva 2003-07-16 22:05:36 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? Jerry Kimberlin 2003-07-16 23:58:58 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? turbulatordude 2003-07-17 02:48:42 UTC Re: LOOKING for homeshop EDM or its power supply? Graham Stabler 2003-07-17 04:11:42 UTC Re: LOOKING for homeshop EDM or its power supply? Jerry Kimberlin 2003-07-17 08:22:54 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? Jerry Kimberlin 2003-07-17 08:23:21 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? turbulatordude 2003-07-17 08:37:29 UTC Re: LOOKING for homeshop EDM or its power supply? Marcus and Eva 2003-07-17 08:39:08 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? Carlos Guillermo 2003-07-17 09:25:10 UTC high-performance EDM power supply Jon Elson 2003-07-17 10:03:54 UTC Re: [CAD_CAM_EDM_DRO] high-performance EDM power supply Graham Stabler 2003-07-17 16:47:06 UTC Re: high-performance EDM power supply Carlos Guillermo 2003-07-17 17:18:59 UTC RE: [CAD_CAM_EDM_DRO] high-performance EDM power supply rfraga@s... 2003-07-17 18:54:58 UTC [CAD_CAM_EDM_DRO] high-performance EDM power supply turbulatordude 2003-07-17 19:39:40 UTC Re: high-performance EDM power supply Carlos Guillermo 2003-07-17 23:21:37 UTC RE: [CAD_CAM_EDM_DRO] high-performance EDM power supply Carlos Guillermo 2003-07-17 23:23:33 UTC RE: [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply eexgs 2003-07-18 02:55:09 UTC Re: high-performance EDM power supply turbulatordude 2003-07-18 05:46:07 UTC Re: high-performance EDM power supply - software Jerry Kimberlin 2003-07-18 07:44:40 UTC Re: [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply Jerry Kimberlin 2003-07-18 07:44:41 UTC EDM vs ECM Graham Stabler 2003-07-18 07:56:23 UTC Re: high-performance EDM power supply turbulatordude 2003-07-18 08:12:16 UTC Re: high-performance EDM power supply Carlos Guillermo 2003-07-18 08:59:14 UTC RE: [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply Marcus and Eva 2003-07-18 09:03:21 UTC Re: [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply - software Jon Elson 2003-07-18 09:57:45 UTC Re: [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply rfraga@s... 2003-07-18 11:48:39 UTC [CAD_CAM_EDM_DRO] Re: high-performance EDM power supply turbulatordude 2003-07-18 14:24:31 UTC Re: -- EDM power supply -- two paths Raymond Heckert 2003-07-18 15:54:53 UTC Re: [CAD_CAM_EDM_DRO] Re: LOOKING for homeshop EDM or its power supply? Graham Stabler 2003-07-19 09:02:08 UTC Re: high-performance EDM power supply - software Graham Stabler 2003-07-19 09:24:15 UTC Re: -- EDM power supply -- two paths Carlos Guillermo 2003-07-19 14:21:41 UTC RE: [CAD_CAM_EDM_DRO] Re: -- EDM power supply -- two paths Graham Stabler 2003-07-20 01:42:45 UTC Re: -- EDM power supply -- two paths