CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug

Posted by Paul
on 2003-07-22 13:36:57 UTC
BDI-Live, Morphix, and Knoppix all boot and run from a CD - At no time will
any Hard Disk space of the host system be used untill YOU tell it to.

BTW 135meg refered to the test versions I have here - If obsinate.org says
125Meg and the MD5 checksums match, then your download is good.

Regards, Paul.


On Tuesday 22 July 2003 9:13 pm, funcadem wrote:
> Message no: 48996 says Knoppix load (i read this to mean boot) from a
> CD-ROM, and without messing with the existing OS? which means one can
> hop from PC to PC? Did I read the archives rightly?

--
irc channel for EMC users at irc.freenode.org
/join #emc
and chat to other users (not many there yet).

Discussion Thread

bob_santa 2002-08-15 09:11:45 UTC Aligning Rails (or ways) on CNC router Bill Vance 2002-08-15 10:32:47 UTC Re: [CAD_CAM_EDM_DRO] Aligning Rails (or ways) on CNC router Jon Elson 2002-08-15 10:55:11 UTC Re: [CAD_CAM_EDM_DRO] Aligning Rails (or ways) on CNC router castinggrain 2002-08-15 20:33:57 UTC Re: [CAD_CAM_EDM_DRO] Aligning Rails (or ways) on CNC router Bill Vance 2002-08-15 21:43:40 UTC Re: [CAD_CAM_EDM_DRO] Aligning Rails (or ways) on CNC router turbulatordude 2002-08-16 04:01:42 UTC water level ( was Re: Aligning Rails (or ways) on CNC router Jon Elson 2002-08-16 10:09:37 UTC Re: [CAD_CAM_EDM_DRO] water level ( was Re: Aligning Rails (or ways) on CNC router Randy Gordon-Gilmore 2002-08-16 11:18:57 UTC Re: [CAD_CAM_EDM_DRO] water level Randy Gordon-Gilmore 2002-08-16 11:35:01 UTC Another question about leveling/squaring mayfieldtm 2002-08-16 11:37:12 UTC master precision levels Doug Harrison 2002-08-16 12:55:55 UTC Re: [CAD_CAM_EDM_DRO] master precision levels turbulatordude 2002-08-16 15:05:25 UTC water level ( was Re: Aligning Rails (or ways) on CNC router bob_santa 2002-08-16 17:35:24 UTC Re: Aligning Rails (or ways) on CNC router Jon Elson 2002-08-16 20:53:25 UTC Re: [CAD_CAM_EDM_DRO] master precision levels Jon Elson 2002-08-16 21:24:03 UTC Re: [CAD_CAM_EDM_DRO] water level ( was Re: Aligning Rails (or ways) on CNC router turbulatordude 2002-08-17 06:03:32 UTC water level ( was Re: Aligning Rails (or ways) on CNC router Carlos Guillermo 2002-08-27 11:04:43 UTC RE: [CAD_CAM_EDM_DRO] master precision levels Randy Gordon-Gilmore 2002-08-27 17:00:48 UTC Demise of free Intellicad Randy Gordon-Gilmore 2002-08-27 17:33:51 UTC Re: [CAD_CAM_EDM_DRO] Demise of free Intellicad Doug Harrison 2002-08-27 17:34:28 UTC RE: [CAD_CAM_EDM_DRO] master precision levels LEW BEST 2002-08-27 18:46:44 UTC RE: [CAD_CAM_EDM_DRO] master precision levels studleylee 2002-08-27 20:19:41 UTC Re: master precision levels Jeff Hamilton 2002-08-27 20:50:28 UTC Cutting Glass scales Dave Lantz 2002-08-28 05:21:30 UTC RE: [CAD_CAM_EDM_DRO] Demise of free Intellicad Kos 2002-08-29 02:36:05 UTC Re: [CAD_CAM_EDM_DRO] Demise of free Intellicad Randy Gordon-Gilmore 2002-08-29 14:58:53 UTC BDI question and Knoppix plug wanliker@a... 2002-08-29 15:22:19 UTC Re: [CAD_CAM_EDM_DRO] BDI question and Knoppix plug Randy Gordon-Gilmore 2002-08-29 15:33:03 UTC Re: BDI question and Knoppix plug William Scalione 2002-08-29 22:26:45 UTC Re: [CAD_CAM_EDM_DRO] BDI question and Knoppix plug Ian W. Wright 2002-08-30 01:22:07 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug Ray Henry 2002-08-30 09:07:13 UTC Re: Re: Re: BDI question and Knoppix plug Ian W. Wright 2002-08-30 10:43:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: BDI question and Knoppix plug Bill Vance 2002-08-30 11:55:49 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug j.guenther 2002-08-30 12:05:25 UTC RE: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug jmkasunich 2002-08-30 14:21:53 UTC EMC / BDI / Linux / RTLinux / RTAI confusion Bill Vance 2002-08-30 14:44:45 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug Randy Gordon-Gilmore 2002-08-30 22:48:43 UTC Re: [CAD_CAM_EDM_DRO] BDI question and Knoppix plug Jon Elson 2002-08-30 23:03:36 UTC Re: [CAD_CAM_EDM_DRO] EMC / BDI / Linux / RTLinux / RTAI confusion Randy Gordon-Gilmore 2002-08-31 02:15:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: BDI question and Knoppix plug funcadem 2003-07-22 02:43:07 UTC Re: Re: BDI question and Knoppix plug Paul 2003-07-22 10:05:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI question and Knoppix plug funcadem 2003-07-22 13:13:53 UTC Re: BDI question and Knoppix plug funcadem 2003-07-22 13:20:30 UTC Re: BDI question and Knoppix plug Paul 2003-07-22 13:36:57 UTC Re: [CAD_CAM_EDM_DRO] Re: BDI question and Knoppix plug